KS0066U 16COM / 40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD INTRODUCTION
80 QFP-1420C
KS0066U is a dot matrix LCD driver & controller LSI whichis
fabricated by low power CMOS technology.
It can display 1or 2 lines with the 5Г—8 dots format or 1 line
with the 5Г—11 dots format. FUNCTIONS Character type dot matrix LCD driver & controller. Internal driver: 16 common and 40 segment signal output. Easy interface with 4-bit or 8-bit MPU. Display character pattern: 5Г—8 dots format (208 kinds) & 5Г—11 dots format (32 kinds). The Special character pattern is directly programmable by the Character Generator RAM. A customer character pattern is programmable by mask option. Programmable Driving Method by the same character font mask option: Display Waveform A-type and B-type It can drive a maximum at 80 characters by using the KS0065B or KS0063B externally. Various instruction functions. Built-in automatic power on reset. FEATURES Internal Memory
-Character Generator ROM (CGROM): 10,080 bits (204 charactersГ—5Г—8 dots) & (32 charactersГ—5Г—11 dots)
-Character Generator RAM (CGRAM): 64Г—8 bits (8 charactersГ—5Г—8 dots)
-Display Data RAM (DDRAM): 80Г—8 bits (80 characters max.) Low power operation
-Power supply voltage range (VDD): 2.7 to 5.5 V
-LCD Drive voltage range (VDD-V5): 3.0 to 13.0 V CMOS process Programmable duty cycle: 1/8, 1/11, 1/16 Internal oscillator with external resistor Low power consumption 80 QFP or bare chip available KS0066U 16COM / 40SEG DRIVER & CONTROLLER FOR DOT MATRIX LCD BLOCK DIAGRAM VDD
GND
Parallel to Serial
Data Conversion Circuit V1
V2
V3
V4
V5 5 Busy
Flag 5 Character
Generator
ROM
(CGROM)
10080 bits Character …