Datasheet Texas Instruments MSP430F2619S-HT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | MSP430F2619S-HT |
MCU de 16 bits de alta temperatura y potencia ultrabaja, flash de 120 KB, RAM de 4KB, ADC de 12 bits, DAC dual, 2 USCI, HW Mult, DMA
Hojas de datos
MSP430F2619S-HT Mixed-Signal Microcontroller datasheet
PDF, 1.6 Mb, Revisión: E, Archivo publicado: nov 16, 2016
Extracto del documento
Precios
Estado
| MSP430F2619S64KGD1 | MSP430F2619SKGD1 | MSP430F2619SPM | |
|---|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No | No | No |
Embalaje
| MSP430F2619S64KGD1 | MSP430F2619SKGD1 | MSP430F2619SPM | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Package Type | KGD | KGD | PM |
| Package QTY | 36 | 36 | 160 |
| Pin | 64 | ||
| Industry STD Term | LQFP | ||
| JEDEC Code | S-PQFP-G | ||
| Carrier | JEDEC TRAY (5+1) | ||
| Device Marking | M430F2619SPM | ||
| Width (mm) | 10 | ||
| Length (mm) | 10 | ||
| Thickness (mm) | 1.4 | ||
| Pitch (mm) | .5 | ||
| Max Height (mm) | 1.6 | ||
| Mechanical Data | Descargar |
Paramétricos
| Parameters / Models | MSP430F2619S64KGD1 | MSP430F2619SKGD1 | MSP430F2619SPM |
|---|---|---|---|
| ADC | ADC12 - 8ch | ADC12 - 8ch | ADC12 - 8ch |
| AES | N/A | N/A | N/A |
| Active Power, uA/MHz | 365 | 365 | 365 |
| Additional Features | Watchdog,DAC,Temp Sensor,Brown Out Reset | Watchdog,DAC,Temp Sensor,Brown Out Reset | Watchdog,DAC,Temp Sensor,Brown Out Reset |
| BSL | UART | UART | UART |
| CPU | MSP430 | MSP430 | MSP430 |
| Comparators | Yes | Yes | Yes |
| DMA | 3 | 3 | 3 |
| Frequency, MHz | 16 | 16 | 16 |
| GPIO | 48 | 48 | 48 |
| I2C | 2 | 2 | 2 |
| Max VCC | 3.6 | 3.6 | 3.6 |
| Min VCC | 1.8 | 1.8 | 1.8 |
| Multiplier | 16x16 | 16x16 | 16x16 |
| Non-volatile Memory, KB | 120 | 120 | 120 |
| Operating Temperature Range, C | -55 to 150 | -55 to 150 | -55 to 150 |
| Package Group | LQFP | LQFP | LQFP |
| Package Size: mm2:W x L, PKG | 64LQFP: 144 mm2: 12 x 12(LQFP) | 64LQFP: 144 mm2: 12 x 12(LQFP) | 64LQFP: 144 mm2: 12 x 12(LQFP) |
| RAM, KB | 4 | 4 | 4 |
| Rating | High Temp | High Temp | High Temp |
| SPI | 4 | 4 | 4 |
| Special I/O | N/A | N/A | N/A |
| Standby Power, LPM3-uA | 0.5 | 0.5 | 0.5 |
| Timers - 16-bit | 2 | 2 | 2 |
| UART | 2 | 2 | 2 |
| Wakeup Time, us | 1 | 1 | 1 |
Plan ecológico
| MSP430F2619S64KGD1 | MSP430F2619SKGD1 | MSP430F2619SPM | |
|---|---|---|---|
| RoHS | See ti.com | See ti.com | Obediente |
Notas de aplicación
- Migrating From MSP430 F2xx and G2xx Families to MSP430 FR4xx and FR2xx Family (Rev. E)PDF, 237 Kb, Revisión: E, Archivo publicado: mayo 4, 2018
This application report helps to ease the migration from MSP430F2xx flash-based MCUs to the MSP430FR4xx and MSP430FR2xx family of FRAM-based MCUs. It discusses programming system hardware core architecture and peripheral considerations. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR4xx and MSP430FR2xx devices see the MSP430 - General Oversampling of MSP ADCs for Higher Resolution (Rev. A)PDF, 551 Kb, Revisión: A, Archivo publicado: abr 1, 2016
Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl
Linea modelo
Serie: MSP430F2619S-HT (3)
Clasificación del fabricante
- Semiconductors> Space & High Reliability> Microcontroller> Low Power MCU> MSP430 MCU