Datasheet Texas Instruments TPS65632RTET — Ficha de datos

FabricanteTexas Instruments
SerieTPS65632
Numero de parteTPS65632RTET
Datasheet Texas Instruments TPS65632RTET

Fuente de alimentación de pantalla AMOLED de triple salida 16-WQFN -40 a 85

Hojas de datos

TPS65632 Triple-Output AMOLED Display Power Supply datasheet
PDF, 1.4 Mb, Revisión: A, Archivo publicado: enero 11, 2016
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin16
Package TypeRTE
Industry STD TermWQFN
JEDEC CodeS-PQFP-N
Package QTY250
CarrierSMALL T&R
Width (mm)3
Length (mm)3
Thickness (mm)0.75
Pitch (mm)0.5
Max Height (mm)0.8
Mechanical DataDescargar

Paramétricos

DisplayTypeAMOLED
IC IntegrationAMOLED Bias
Pin/Package16WQFN
Source Driver Voltage(Max)7.7 V
Source Driver Voltage(Min)5.8 V
Special FunctionDigital Control I/F
Target Application7 inches or less
TopologyBoost,Inverting Buck-Boost
V_NEG(Max)-1.4 V
V_NEG(Min)-5.4 V
V_POS(Max)4.6 V
V_POS(Min)4.6 V
Vin(Max)4.5 V
Vin(Min)2.9 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TPS65632EVM-712
    TPS65632 Triple-Output AMOLED Display Power Supply Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Basic Calculation of an Inverting Buck-Boost Power Stage (Rev. A)
    PDF, 431 Kb, Revisión: A, Archivo publicado: agosto 28, 2017
    This application note provides basic formulas that you need to design the power stage of an invertingbuck-boost converter. The premise is that the power switch is integrated in the IC and the rectification isdone by a diode (non-synchronous power stage). It provides all the formulas and considerations that youneed to select the external power components such as the inductor the diode and t
  • Understanding Undervoltage Lockout in Power Devices (Rev. A)
    PDF, 90 Kb, Revisión: A, Archivo publicado: sept 19, 2018
    Many integrated circuits include an undervoltage lockout (UVLO) function to disable the device at low supply voltages. Below the minimum supply voltage the function and performance of a device may be undefined making it impossible to predict system behavior. This application note explains how to correctly understand the undervoltage lockout specification in the data sheets of TI's power products.
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, Archivo publicado: sept 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revisión: C, Archivo publicado: enero 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.

Linea modelo

Serie: TPS65632 (2)

Clasificación del fabricante

  • Semiconductors > Power Management > LCD/OLED Display Bias Solutions