Datasheet MPU-6000, MPU-6050 - 38
| Descripción | MPU-60X0 is the world's first integrated 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion ProcessorTM (DMP) all in a small 4x4x0.9mm package |
| Páginas / Página | 52 / 38 — MPU-6000/MPU-6050 Product Specification. 10 Serial Interface … |
| Revisión | 3.4 |
| Formato / tamaño de archivo | PDF / 1.6 Mb |
| Idioma del documento | Inglés |
MPU-6000/MPU-6050 Product Specification. 10 Serial Interface Considerations (MPU-6050). 10.1 MPU-6050 Supported Interfaces
Línea de modelo para esta hoja de datos
Versión de texto del documento
Document Number: PS-MPU-6000A-00
MPU-6000/MPU-6050 Product Specification
Revision: 3.4 Release Date: 08/19/2013
10 Serial Interface Considerations (MPU-6050) 10.1 MPU-6050 Supported Interfaces
The MPU-6050 supports I2C communications on both its primary (microprocessor) serial interface and its auxiliary interface.
10.2 Logic Levels
The MPU-6050’s I/O logic levels are set to be VLOGIC, as shown in the table below. AUX_VDDIO must be set to 0.
I/O Logic Levels vs. AUX_VDDIO MICROPROCESSOR LOGIC LEVELS AUXILLARY LOGIC LEVELS AUX_VDDIO
(Pins: SDA, SCL, AD0, CLKIN, INT) (Pins: AUX_DA, AUX_CL) 0 VLOGIC VLOGIC Note: The power-on-reset value for AUX_VDDIO is 0. When AUX_VDDIO is set to 0 (its power-on-reset value), VLOGIC is the power supply voltage for both the microprocessor system bus and the auxiliary I2C bus, as shown in the figure of Section 10.3. 38 of 52
MPU-6000/MPU-6050 Product Specification
Revision: 3.4 Release Date: 08/19/2013
10 Serial Interface Considerations (MPU-6050) 10.1 MPU-6050 Supported Interfaces
The MPU-6050 supports I2C communications on both its primary (microprocessor) serial interface and its auxiliary interface.
10.2 Logic Levels
The MPU-6050’s I/O logic levels are set to be VLOGIC, as shown in the table below. AUX_VDDIO must be set to 0.
I/O Logic Levels vs. AUX_VDDIO MICROPROCESSOR LOGIC LEVELS AUXILLARY LOGIC LEVELS AUX_VDDIO
(Pins: SDA, SCL, AD0, CLKIN, INT) (Pins: AUX_DA, AUX_CL) 0 VLOGIC VLOGIC Note: The power-on-reset value for AUX_VDDIO is 0. When AUX_VDDIO is set to 0 (its power-on-reset value), VLOGIC is the power supply voltage for both the microprocessor system bus and the auxiliary I2C bus, as shown in the figure of Section 10.3. 38 of 52