Datasheet LTC5533 (Analog Devices)

FabricanteAnalog Devices
Descripción300MHz to 11GHz Precision Dual RF Power Detector
Páginas / Página12 / 1 — FEATURES. DESCRIPTIO. Two Independent Temperature Compensated. Schottky …
Formato / tamaño de archivoPDF / 252 Kb
Idioma del documentoInglés

FEATURES. DESCRIPTIO. Two Independent Temperature Compensated. Schottky Diode RF Peak Detectors

Datasheet LTC5533 Analog Devices

Línea de modelo para esta hoja de datos

Versión de texto del documento

LTC5533 300MHz to 11GHz Precision Dual RF Power Detector
U FEATURES DESCRIPTIO

Two Independent Temperature Compensated
The LTC®5533 is a dual channel RF power detector for RF
Schottky Diode RF Peak Detectors
applications operating in the 300MHz to 11GHz range. ■
45dB Channel-to-Channel Isolation at 2GHz
Two independent temperature compensated Schottky di- ■
Wide Input Frequency Range: 300MHz to 11GHz*
ode peak detectors and buffer amplifiers are combined in ■
Wide Input Power Range: –32dBm to 12dBm
a small 4mm × 3mm DFN package. ■
Buffered Detector Outputs with Gain of 2x
The RF input voltage is peak detected using on-chip ■
Adjustable VOUT Starting Voltage
Schottky diodes. The detected voltage is buffered and ■
Wide VCC Range of 2.7V to 6V
supplied to the V ■ Low Operating Current: <500µA/Channel OUT pins. A power saving shutdown mode reduces current to less than 2µA/channel. The initial ■ Low Shutdown Current: <2µA/Channel output starting voltages can be precisely adjusted using ■ 4mm × 3mm DFN Package the VOS pins.
U
The LTC5533 operates with input power levels from
APPLICATIO S
–32dBm to 12dBm. ■ PA Forward and Reverse Power Monitor , LTC and LT are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners. ■ Dual PA Transmit Power Control *Higher frequency operation is achievable with reduced performance. Consult factory for more information. ■ 802.11a, b, g, 802.15, WiMAX ■ PA Linearization ■ Fixed Wireless Access ■ RF Power Alarm ■ Envelope Detector
U TYPICAL APPLICATIO 300MHz to 11GHz RF Power Detectors Output Voltage vs RF Input Power
3600 V LTC5533 39pF CC = 3.6V 3200 VOS = 0V V V RF RF1 INPUT 4GHz CC CC1 IN1 TA = 25°C 2800 100pF 1GHz VOUT1 GND1 2400 5GHz VOS1 VOS1 SHDN1 39pF 2000 500MHz VCC2 RFIN2 RF2 INPUT 1600 6GHz 0.1µF 100pF V 1200 OUT2 GND2 OUTPUT VOLTAGE (mV) 8GHz 11GHz OUT 800 V V OS2 V SHDN2 DISABLE ENABLE OS2 10GHz 400 5533 TA01 9GHz 0 (EXPOSED PAD) –28 –24 –20 –16 –12 –8 –4 0 4 8 12 RF INPUT POWER (dBm) 5533 TA02 5533f 1