Datasheet LT3695 (Analog Devices) - 3

FabricanteAnalog Devices
Descripción1A Fault Tolerant Micropower Step-Down Regulator
Páginas / Página30 / 3 — ELECTRICAL CHARACTERISTICS. The. denotes the specifi cations which apply …
Formato / tamaño de archivoPDF / 508 Kb
Idioma del documentoInglés

ELECTRICAL CHARACTERISTICS. The. denotes the specifi cations which apply over the full operating

ELECTRICAL CHARACTERISTICS The denotes the specifi cations which apply over the full operating

Línea de modelo para esta hoja de datos

Versión de texto del documento

LT3695 Series
ELECTRICAL CHARACTERISTICS The
l
denotes the specifi cations which apply over the full operating temperature range, otherwise specifi cations are at TA = 25°C. VIN = 10V, VRUN/SS = 10V, unless otherwise noted. (Note 4) PARAMETER CONDITIONS MIN TYP MAX UNITS
Minimum Operating Voltage (Note 6) LT3695 VBD = 3.3V l 3.4 3.6 V VBD < 3V l 3.4 4.3 V LT3695-3.3 VOUT1,2 = 3.3V l 3.4 3.6 V LT3695-5 VOUT1,2 = 5V l 3.4 3.6 V VIN Overvoltage Lockout l 36 38 39.9 V Quiescent Current from VIN VRUN/SS = 0.2V VBD = 3.3V 0.01 0.5 μA LT3695 VRUN/SS = 10V, VBD = 3.3V, Not Switching l 35 60 μA VRUN/SS = 10V, VBD = 0V, Not Switching 90 160 μA LT3695-3.3 VRUN/SS = 10V, VOUT1,2 = 3.3V, Not Switching l 35 60 μA LT3695-5 VRUN/SS = 10V, VOUT1,2 = 5V, Not Switching l 35 60 μA Quiescent Current from BD Pin LT3695 VRUN/SS = 0.2V, VBD = 3.3V 0.01 0.5 μA VRUN/SS = 10V, VBD = 3.3V, Not Switching l 35 55 100 μA VRUN/SS = 10V, VBD = 0V, Not Switching 0 –5 μA Quiescent Current from OUT1,2 Pins LT3695-3.3 VRUN/SS = 0.2V 5 10 15 μA VRUN/SS = 10V, VOUT1,2 = 3.3V, Not Switching l 43 65 112 μA LT3695-5 VRUN/SS = 0.2V 5 10 15 μA VRUN/SS = 10V, VOUT1,2 = 5V, Not Switching l 43 65 112 μA Minimum BD Pin Voltage: LT3695 2.8 3 V Feedback Voltage: LT3695 792 800 808 mV l 785 800 815 mV FB Pin Bias Current: LT3695 FB Pin Voltage = 800mV l –5 –40 nA Reference Voltage Line Regulation 3.6V < VIN < 36V 0.001 0.005 %/V Output Voltage LT3695-3.3 3.27 3.3 3.33 V l 3.25 3.3 3.35 V LT3695-5 4.95 5 5.05 V l 4.925 5 5.075 V Error Amp gm IVC = ±1.5μA 430 μS Error Amp Voltage Gain 1300 V/V VC Source Current 50 μA VC Sink Current 50 μA VC Pin to Switch Current Gain 1.25 A/V VC Switching Threshold 0.4 0.6 0.8 V VC Clamp Voltage 2 V Switching Frequency RRT = 8.06k 1.98 2.2 2.42 MHz RRT = 29.4k 0.9 1.0 1.1 MHz RRT = 158k 225 250 275 kHz Minimum Switch Off-Time E- and I-Grades l 130 210 ns H-Grade l 130 250 ns Switch Current Limit (Note 7) SYNC = 0V 1.45 1.7 2 A SYNC = 3.3V or Clocked 1.18 1.4 1.66 A 3695fa 3