Datasheet Analog Devices ADA4897-1ARZ — Ficha de datos

REVISIONS
LTR DESCRIPTION DATE Prepared in accordance with ASME Y14.24 APPROVED Vendor item drawing REV
PAGE
REV
PAGE 18 19 REV STATUS
OF PAGES 20 21 22 REV
PAGE 1 2 PMIC N/A PREPARED BY
RICK OFFICER Original date of drawing
YY-MM-DD CHECKED BY
RAJESH PITHADIA 13-07-02 4 A
REV 5 6 7 8 9 10 11 12 13 14 15 16 17 DLA LAND AND MARITIME
COLUMBUS, OHIO 43218-3990
http://www.landandmaritime.dla.mil/
TITLE
MICROCIRCUIT, LINEAR, LOW POWER OUTPUT
AMPLIFIERS, MONOLITHIC SILICON APPROVED BY
CHARLES F. SAFFLE
SIZE AMSC N/A 3 CODE IDENT. NO. DWG NO. V62/13614 16236
PAGE 1 OF 22
5962-V057-13 1. SCOPE
1.1 Scope. This drawing documents the general requirements of a high performance low power output amplifiers microcircuit, with
an operating temperature range of -55°C to +125°C.
1.2 Vendor Item Drawing Administrative Control Number. The manufacturer’s PIN is the item of identification. The vendor item …

FEATURES Low noise preamplifier
Ultrasound amplifiers
PLL loop filters
High performance ADC drivers
DAC buffers NC 1 8 DISABLE –IN 2 7 +VS +IN 3 6 OUT –VS 4 5 NC Figure 1. 8-Lead SOIC (ADA4897-1)
8 VS = ±5V 7
6
5
4
3
2
1
0 1 10 100 1k 10k 100k 1M 5M FREQUENCY (Hz) Figure 2. Voltage Noise vs. Frequency GENERAL DESCRIPTION
The ADA4896-2/ADA4897-1/ADA4897-2 are unity-gain stable,
low noise, rail-to-rail output, high speed voltage feedback amplifiers
that have a quiescent current of 3 mA. With a 1/f noise of
2.4 nV/√Hz at 10 Hz and a spurious-free dynamic range of −80 dBc
at 2 MHz, the ADA4896-2/ADA4897-1/ADA4897-2 are ideal
solutions in a variety of applications, including ultrasound, low
noise preamplifiers, and drivers of high performance ADCs. The
Analog Devices, Inc., proprietary next-generation SiGe bipolar
process and innovative architecture enable such high performance
amplifiers. …

1 nV/√Hz, Low Power,
Rail-to-Rail Output Amplifiers
ADA4897-1-EP/ADA4897-2-EP FEATURES
Low wideband noise
1 nV/√Hz
2.8 pA/√Hz
Low 1/f noise: 2.4 nV/√Hz at 10 Hz
Low distortion: −115 dBc at 100 kHz, VOUT = 2 V p-p
Low power: 3 mA per amplifier
Low input offset voltage: 0.5 mV maximum
High speed
−3 dB bandwidth: 230 MHz (G = +1)
Slew rate: 120 V/μs
Settling time to 0.1%: 45 ns
Rail-to-rail output
Wide supply range: 3 V to 10 V
Disable feature The ADA4897-1-EP is available in 6-lead SOT-23 package and
the ADA4897-2-EP is available in a 10-lead MSOP package. The
ADA4897-1-EP/ADA4897-2-EP operate over the extended
industrial temperature range of −55°C to +125°C. Additional
application and technical information can be found in the
ADA4897-1/ADA4897-2 data sheet. FUNCTIONAL BLOCK DIAGRAM
ADA4897-1-EP …