Datasheet ADP5062ACPZ-1-R7 - Analog Devices BATT CHRGR, 6.7 V, LI-ION, 2.1 A, 20LFCSP — Ficha de datos

Analog Devices ADP5062ACPZ-1-R7

Part Number: ADP5062ACPZ-1-R7

Descripción detallada

Manufacturer: Analog Devices

Description: BATT CHRGR, 6.7 V, LI-ION, 2.1 A, 20LFCSP

data sheetDownload Data Sheet

Docket:
Data Sheet
FEATURES
Linear Li-Ion Battery Charger with Power Path and USB Compatibility in LFCSP ADP5062
GENERAL DESCRIPTION
The ADP5062 charger is fully compliant with USB 3.0 and the USB Battery Charging Specification 1.2 and enables charging via the mini USB VBUS pin from a wall charger, car charger, or USB host port.

The ADP5062 operates from a 4 V to 6.7 V input voltage range but is tolerant of voltages up to 20 V thereby alleviating concerns about USB bus spikes during disconnect or connect scenarios. The ADP5062 features an internal FET between the linear charger output and the battery. This permits battery isolation and, hence, system powering under a dead battery or no battery scenario, which allows for immediate system function on connection to a USB power supply. Based on the type of USB source, which is detected by an external USB detection chip, the ADP5062 can be set to apply the correct current limit for optimal charging and USB compliance. The ADP5062 has three factory

Specifications:

  • Battery Type: Lithium Ion
  • Charge Current Max: 2.1 A
  • MSL: MSL 1 - Unlimited
  • Number of Pins: 20
  • Number of Series Cells: 1
  • Operating Temperature Range: -40°C to +125°C
  • RoHS: Yes
  • SVHC: No SVHC (18-Jun-2012)

Otros nombres:

ADP5062ACPZ1R7, ADP5062ACPZ 1 R7