Datasheet Texas Instruments SN412008DRE4 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | OPA2134 |
| Numero de parte | SN412008DRE4 |
Amplificador operacional de audio SoundPlus ™ con baja distorsión, bajo ruido y precisión 8-SOIC -40 a 85
Hojas de datos
OPAx134 SoundPlusв„ў High Performance Audio Operational Amplifiers datasheet
PDF, 1.2 Mb, Revisión: A, Archivo publicado: oct 28, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | 2134UA | OPA |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Additional Features | Burr-Brownв„ў Audio |
| Architecture | FET |
| CMRR(Min) | 86 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 8 MHz |
| Input Bias Current(Max) | 100 pA |
| Iq per channel(Max) | 5 mA |
| Iq per channel(Typ) | 4 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 40 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 20 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Daughter Cards: AUDK2G
66AK2Gx (K2G) Audio Daughter Card
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Stabilizing difference amplifiers for headphone applicationsPDF, 670 Kb, Archivo publicado: abr 28, 2015
- Reducing distortion from CMOS analog switchesPDF, 375 Kb, Archivo publicado: enero 29, 2015
- Distortion and source impedance in JFET-input op ampsPDF, 182 Kb, Archivo publicado: oct 24, 2014
- Remove the DC Portion of Signals with the ADS7817PDF, 55 Kb, Archivo publicado: sept 27, 2000
Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti
Linea modelo
Serie: OPA2134 (8)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps