Datasheet Texas Instruments LM2902N — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | LM2902 |
| Numero de parte | LM2902N |
Amplificador operacional cuádruple 14-PDIP -40 a 125
Hojas de datos
Datasheet LM124, LM124A, LM124M, LM224, LM224A, LM224K, LM224KA, LM2902, LM2902K, LM2902KAV, LM2902KV, LM2902V, LM324, LM324A, LM324K, LM324KA
PDF, 1.8 Mb, Revisión: W, Archivo publicado: marzo 30, 2014, Páginas: 42
Quadruple Operational Amplifiers
Quadruple Operational Amplifiers
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 14 |
| Package Type | N |
| Industry STD Term | PDIP |
| JEDEC Code | R-PDIP-T |
| Package QTY | 25 |
| Carrier | TUBE |
| Device Marking | LM2902N |
| Width (mm) | 6.35 |
| Length (mm) | 19.3 |
| Thickness (mm) | 3.9 |
| Pitch (mm) | 2.54 |
| Max Height (mm) | 5.08 |
| Mechanical Data | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 50 dB |
| CMRR(Typ) | 80 dB |
| GBW(Typ) | 1.2 MHz |
| Input Bias Current(Max) | 250000 pA |
| Iq per channel(Max) | 0.3 mA |
| Iq per channel(Typ) | 0.175 mA |
| Number of Channels | 4 |
| Offset Drift(Typ) | 7 uV/C |
| Operating Temperature Range | -40 to 125 C |
| Output Current(Typ) | 40 mA |
| Package Group | PDIP |
| Package Size: mm2:W x L | See datasheet (PDIP) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 0.5 V/us |
| Total Supply Voltage(Max) | 26 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 3 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 35 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 7 mV |
Plan ecológico
| RoHS | Obediente |
| Pb gratis | Sí |
Notas de aplicación
- Design of a Low Cost, 45W Flasher with Short Circuit ProtectionPDF, 548 Kb, Archivo publicado: abr 19, 2014
- AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)PDF, 194 Kb, Revisión: A, Archivo publicado: mayo 6, 2013
This application report presents part 2 of the flat panel display design guidelines. - AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)PDF, 245 Kb, Revisión: A, Archivo publicado: mayo 6, 2013
This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications.
Linea modelo
Serie: LM2902 (16)
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps