Datasheet Texas Instruments ADC10040CIMT/NOPB — Ficha de datos

ADC10040
www.ti.com SNAS224M – JULY 2003 – REVISED APRIL 2013 ADC10040/ADC10040Q 10-Bit, 40 MSPS, 3V, 55.5 mW A/D Converter
Check for Samples: ADC10040 FEATURES DESCRIPTION The ADC10040 is a monolithic CMOS analog-todigital converter capable of converting analog input
signals into 10-bit digital words at 40 Megasamples
per second (MSPS). This converter uses a
differential, pipeline architecture with digital error
correction and an on-chip sample-and-hold circuit to
provide a complete conversion solution, and to
minimize power consumption, while providing
excellent dynamic performance. A unique sampleand-hold stage yields a full-power bandwidth of 400
MHz. Operating on a single 3.0V power supply, this
device consumes just 55.5 mW at 40 MSPS,
including the reference current. The Standby feature
reduces power consumption to just 13.5 mW. 1 2 Single +3.0V Operation
Selectable 2.0 VP-P, 1.5 VP-P, or 1.0 VP-P fullscale input swing
400 MHz -3 dB Input Bandwidth
Low Power Consumption
Standby Mode
On-Chip Reference and Sample-and-Hold
Amplifier
Offset Binary or Two’s Complement Data
Format
Separate Adjustable Output Driver Supply to …