Datasheet Texas Instruments LP2951DRG4 — Ficha de datos

FabricanteTexas Instruments
SerieLP2951
Numero de parteLP2951DRG4
Datasheet Texas Instruments LP2951DRG4

Reguladores de voltaje de microvoltaje de 30 V y 100 mA con apagado 8-SOIC -40 a 125

Hojas de datos

LP295x Adjustable Micropower Voltage Regulators with Shutdown datasheet
PDF, 3.7 Mb, Revisión: I, Archivo publicado: nov 12, 2014
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2500
CarrierLARGE T&R
Device MarkingLP2951
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

Accuracy3 %
Fixed Output Options3,3.3,5 V
Iout(Max)0.1 A
Iq(Typ)0.075 mA
Noise160 uVrms
Operating Temperature Range-40 to 125 C
Output Capacitor TypeNon-Ceramic
Output OptionsAdjustable Output,Fixed Output
PSRR @ 100KHz57 dB
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Power Good
Thermal Resistance ОёJA52 В°C/W
Vdo(Typ)380 mV
Vin(Max)30 V
Vin(Min)2 V
Vout(Max)29 V
Vout(Min)1.2 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: LP2951EVM
    LP2951 Fixed/Adjustable Micropower Low-Dropout (LDO) Regulator Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Low-Voltage Current Loop Transmitter
    PDF, 519 Kb, Archivo publicado: agosto 2, 2007
  • Extending the Input Voltage Range of an LDO Regulator
    PDF, 32 Kb, Archivo publicado: agosto 16, 2002
    This application report explains how to use a FET to overcome the input voltage limitation of a linear regulator.
  • ESR Stability and the LDO Regulator
    PDF, 83 Kb, Archivo publicado: mayo 7, 2002
    Choosing an output capacitor for LDO regulators with PNP or PMOS pass element can be difficult to specific ESR requirements. This application note explains why higher ESR capacitors are necessary how to chose them and how to determine whether or not the regulator is stable.
  • Simple Power Solution Using LDOs for the DM365 (Rev. A)
    PDF, 104 Kb, Revisión: A, Archivo publicado: sept 11, 2009
  • 3.6V - 5.5V Input LDO with Dual-Level Output Reference Design for MSP430 (Rev. A)
    PDF, 199 Kb, Revisión: A, Archivo publicado: jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design with extended battery life by putting the MSP430 into a low-power state between operating states.
  • Battery Charging
    PDF, 146 Kb, Archivo publicado: marzo 21, 2007
  • Low Power 150-mA LDO Linear Regulators. Extended Output Voltage Adjustment Range
    PDF, 41 Kb, Archivo publicado: jun 11, 1999
    The TPS76301 low-dropout (LDO) adjustable linear regulator generates a regulated 1-V output from an input voltage ranging from 3 V to 6 V. The application circuit is based on the application detailed in the TPS76301 data sheet (TI Literature number SLVS181A Figure 21) except for the auxiliary circuit which is shown here in Figure 1.
  • 3.6V - 5.5V Input LDO Reference Design for MSP430 (Rev. A)
    PDF, 110 Kb, Revisión: A, Archivo publicado: jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 3.6 V to 5.5 V and who are also interested in using an easy-to-use low-dropout linear regulator (LDO) for a simple design but may not be as concerned about maintaining the highest possible efficiency or longest battery life.
  • AN-1815 LDOs Ease the Stress of Start-Up (Rev. A)
    PDF, 81 Kb, Revisión: A, Archivo publicado: abr 24, 2013
    The LP38851/52/53 devices with soft-start provide a reliable way to ensure that start-up into highcapacitive loads is uneventful and stress free.
  • Ceramic Capacitors Replace Tantalum Capacitors in LDOs (Rev. A)
    PDF, 44 Kb, Revisión: A, Archivo publicado: oct 13, 2006
    With the proper considerations ceramic output capacitors can be used with low dropout regulators (LDO) and DC/DC switching converters that require tantulum output capacitors.
  • Understanding LDO Dropout
    PDF, 52 Kb, Archivo publicado: mayo 9, 2005
    Not all low dropout (LDO) linear regulator data sheets provide the voltage dropout information needed for all applications. This application report shows a designer how to use an LDO data sheet's specified dropout performance to determine the dropout voltage at other operating conditions.
  • AN-1061 Power Conversion in Line-Powered Equipment (Rev. B)
    PDF, 406 Kb, Revisión: B, Archivo publicado: abr 23, 2013
    This application note describes line-powered equipment and power conversion techniques or methods tosolve those typical power needs.
  • A Topical Index of TI Supply Voltage Supervisor (SVS) Application Notes
    PDF, 56 Kb, Archivo publicado: jun 15, 2015
  • Techniques for accurate PSRR measurements
    PDF, 1.9 Mb, Archivo publicado: oct 28, 2013
  • AN-1950 Silently Powering Low Noise Applications (Rev. A)
    PDF, 10.5 Mb, Revisión: A, Archivo publicado: abr 22, 2013
    This application report explains how to implement a low noise switch mode power supply solution. Itintroduces the sources of noise and explain how to minimize them. A big factor in noise generation andpropagation is the printed circuit board layout. Important basics are discussed. Circuit measurementtechniques are also explained to guide a design engineer towards a low noise but efficient so
  • LDO Performance Near Dropout
    PDF, 149 Kb, Archivo publicado: oct 8, 2010
  • AN-1482 LDO Regulator Stability Using Ceramic Output Capacitors (Rev. A)
    PDF, 169 Kb, Revisión: A, Archivo publicado: abr 25, 2013
    Ultra-low ESR capacitors such as ceramics are highly desirable because they can support fast-changingload transients and also bypass very high frequency noise coming from switching converter powersources which a linear regulator can not reject. However using ultra-low ESR capacitors on the output ofan LDO regulator requires that specific design changes be implemented to ensure loop stabili
  • Technical Review of Low Dropout Voltage Regulator Operation And Performance
    PDF, 284 Kb, Archivo publicado: agosto 30, 1999
    This application report provides a technical review of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current and topologies. The report also includes detailed discussions of load/line regulation efficiency frequency response range of stable ESR and accuracy of LDO voltage regulators.
  • Linear and Switching Voltage Regulator Fundamental Part 1
    PDF, 183 Kb, Archivo publicado: marzo 21, 2007
  • AN-1028 Maximum Power Enhancement Techniques for Power Packages (Rev. B)
    PDF, 684 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
    The purpose of this application report is to aid the user in maximizing the power handling capability of Texas Instruments power packages by using the SOT-223 as an example.
  • Fundamental Theory of PMOS LDO Voltage Regulators
    PDF, 66 Kb, Archivo publicado: mayo 7, 1999
    This report presents a fundamental understanding on the theory of low-dropout voltage regulators using a PMOS FET as the pass element to adjust the output current to the load requirements.
  • Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A)
    PDF, 509 Kb, Revisión: A, Archivo publicado: jun 4, 2008
  • Understanding the Terms and Definitions of LDO Voltage Regulators
    PDF, 197 Kb, Archivo publicado: oct 21, 1999
    This report provides an understanding of the terms and definitions of low dropout (LDO) voltage regulators and describes fundamental concepts including dropout voltage quiescent current standby current efficiency transient response line/load regulation power supply rejection output noise voltage accuracy and power dissipation. Each section includes an example to increase the understandab
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, Archivo publicado: mayo 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.
  • A Topical Index of TI LDO Application Notes (Rev. F)
    PDF, 82 Kb, Revisión: F, Archivo publicado: jun 27, 2019
  • LDO PSRR Measurement Simplified (Rev. A)
    PDF, 131 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
    This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
  • LDO Noise Demystified (Rev. A)
    PDF, 785 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
    Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO
Publicaciones relacionadas