Datasheet Texas Instruments TPS54110PWP — Ficha de datos

Typical Size
(6,3 mm x 6,4 mm) TPS54110
SLVS500C – DECEMBER 2003 – REVISED FEBRUARY 2011 www.ti.com 3-V TO 6-V Input, 1.5-A Output Synchronous-Buck PWM
Switcher with Integrated FETs ( SWIFTв„ў)
Check for Samples: TPS54110 FEATURES DESCRIPTION As members of the SWIFT family of dc/dc regulators,
the TPS54110 low-input-voltage high-output-current
synchronous-buck PWM converter integrates all
required active components. Included on the
substrate with the listed features are a true, highperformance, voltage error amplifier that provides
high performance under transient conditions; an
undervoltage-lockout circuit to prevent start-up until
the input voltage reaches 3 V; an internally and
externally set slow-start circuit to limit in-rush
currents; and a power-good output useful for
processor/logic reset, fault signaling, and supply
sequencing. 1 2 Integrated MOSFET Switches for High
Efficiency at 1.5-A Continuous Output Source
or Sink Current
0.9-V to 3.3-V Adjustable Output Voltage With
1% Accuracy
Externally Compensated for Design Flexibility
Fast Transient Response
Wide PWM Frequency: Fixed 350 kHz, 550 kHz, …