Datasheet Texas Instruments TL5001AIDR — Ficha de datos

FabricanteTexas Instruments
SerieTL5001A
Numero de parteTL5001AIDR
Datasheet Texas Instruments TL5001AIDR

Controlador PWM con amplio rango de voltaje de entrada 8-SOIC -40 a 85

Hojas de datos

Pulse-Width-Modulation Control Circuits datasheet
PDF, 1.1 Mb, Revisión: F, Archivo publicado: enero 31, 2002
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2500
CarrierLARGE T&R
Device Marking5001AI
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

Duty Cycle(Max)100 %
Iout(Max)3 A
Iq(Typ)1.1 mA
Operating Temperature Range-20 to 85,-40 to 125,-40 to 85 C
Package GroupSOIC
RatingCatalog
Special FeaturesN/A
Switch Current Limit(Min)3 A
Switching Frequency(Max)400 kHz
Switching Frequency(Min)50 kHz
TopologyBoost,Buck,Flyback,Forward,Inverting,Zeta
TypeController
Vin(Max)40 V
Vin(Min)3.6 V
Vout(Max)50 V
Vout(Min)1 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TL5001AEVM-108
    Cost Effective PWM Buck Controller with 3.3V/3A output
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • TMS320C62x/67x Power Supply Solutions for 1-2 DSPs Using the TL5001A and TPS7133 (Rev. A)
    PDF, 190 Kb, Revisión: A, Archivo publicado: jun 1, 1999
    This application report describes a low-cost power solution for Texas Instruments' TMS320C6000 DSP applications using the TL5001PWM controller and the TPS7133 low drop-out voltage regulator. The reference design included in this report uses the TL5001AEVM-122 (SLVP122) evaluation module (EVM) which is available for customer testing and evaluation.
  • Voltage Regulator Solutions for Xilinx Virtex E Dual Voltage FPGAs
    PDF, 77 Kb, Archivo publicado: jun 13, 2000
    This application report serves as a reference for engineers designing with Xilinix 2.5-V and 1.8-V Virtex multivoltage FPGA products. It provides basic information on the issues facing engineers not experienced with multivoltage type products.
  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revisión: C, Archivo publicado: enero 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost or Inverting Controller (External Switch)