Datasheet Texas Instruments BQ2000PWG4 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | BQ2000 |
| Numero de parte | BQ2000PWG4 |
Cargador de batería de química múltiple en modo conmutado con terminación de detección de voltaje máximo 8-TSSOP -20 a 70
Hojas de datos
Programmable MultiChemistry Fast-Charge Management IC datasheet
PDF, 1.3 Mb, Revisión: D, Archivo publicado: dic 7, 2009
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | PW |
| Industry STD Term | TSSOP |
| JEDEC Code | R-PDSO-G |
| Package QTY | 150 |
| Carrier | TUBE |
| Device Marking | BQ200 |
| Width (mm) | 4.4 |
| Length (mm) | 3 |
| Thickness (mm) | 1 |
| Pitch (mm) | .65 |
| Max Height (mm) | 1.2 |
| Mechanical Data | Descargar |
Paramétricos
| Absolute Vin (safety rating)(Max)( | 7 V |
| Battery Charge Voltage(Max) | 20 V |
| Cell Chemistry | Li-Ion/Li-Polymer,NiCd,NiMH |
| Charge Current(Max) | 2 A |
| Control Interface | Standalone (RC-Settable) |
| Control Topology | Switch-Mode Buck |
| Number of Series Cells | 1,2,3,4 |
| Operating Vin(Max) | 6 V |
| Operating Vin(Min) | 4 V |
| Package Group | TSSOP |
| Package Size: mm2:W x L | 8TSSOP: 19 mm2: 6.4 x 3(TSSOP) PKG |
| Special Features | Temp Monitoring (Thermistor Pin) |
| USB Feature | N/A |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: DV2000S1
BQ2000 Evaluation Module for Multi-Chemistry, switchmode
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños) - Evaluation Modules & Boards: BQ2000EVM
Evaluation Module for Battery Charge Management IC
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- High Efficiency Dual Chemistry Charger Using the bq2000PDF, 130 Kb, Archivo publicado: sept 5, 1999
In this example, the bq2000 is used to design a simple and cost-effective chemistry-independent charger. This implementation is suitable for any application requiring a high efficiency charge management in a small footprint. - Bq2000 in Constant Voltage Phase for Li-ion BatteryPDF, 533 Kb, Archivo publicado: oct 31, 2011
The bq2000 charger can be used to charge Li-Ion, NiCd, or NiMH batteries. It uses three charging modes, the pre-charge, fast charge, and termination mode. It detects the battery chemistry type during the fast charge mode by monitoring the battery voltage profile. Once the chemistry is determined, the part completes the fast charge algorithm for the appropriate chemistry type. For Li-Ion batteries, - U-504 Using the bq2000/T to Control Fast Charge (Rev. B)PDF, 193 Kb, Revisión: B, Archivo publicado: dic 2, 2004
The bq2000/T are programmable, monolithic ICs for fast-charge management of nickel cadmium, nickel metal-hydride, and lithium-ion batteries in single- or multichemistry applications. This application note discusses simple ways to select all necessary components to implement various switch-mode topologies. It also discusses how to configure the bq2000/T inputs to accomodate different appplication c - Battery Charger Termination Issues With System Load Applied Across Battery (Rev. A)PDF, 151 Kb, Revisión: A, Archivo publicado: oct 2, 2006
Battery Charger Termination Issues With System Load Applied Across Battery While Charging
Linea modelo
Serie: BQ2000 (9)
Clasificación del fabricante
- Semiconductors > Power Management > Battery Management Products > Battery Charger IC