Datasheet Texas Instruments LMH6629MF/NOPB — Ficha de datos

FabricanteTexas Instruments
SerieLMH6629
Numero de parteLMH6629MF/NOPB
Datasheet Texas Instruments LMH6629MF/NOPB

Amplificador operacional de ultra bajo ruido y alta velocidad con apagado 5-SOT-23 -40 a 125

Hojas de datos

LMH6629 Ultra-Low Noise, High-Speed Operational Amplifier with Shutdown datasheet
PDF, 9.2 Mb, Revisión: I, Archivo publicado: dic 5, 2014
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin5
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY1000
CarrierLARGE T&R
Device MarkingAE7A
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical DataDescargar

Paramétricos

2nd Harmonic88 dBc
3rd Harmonic74 dBc
@ MHz1
Acl, min spec gain4 V/V
Additional FeaturesDecompensated
ArchitectureBipolar,Voltage FB
BW @ Acl900 MHz
CMRR(Min)82 dB
CMRR(Typ)87 dB
GBW(Typ)4000 MHz
Input Bias Current(Max)23000 pA
Iq per channel(Max)16.7 mA
Iq per channel(Typ)15.5 mA
Number of Channels1
Offset Drift(Typ)0.45 uV/C
Operating Temperature Range-40 to 125,-40 to 85 C
Output Current(Typ)250 mA
Package GroupSOT-23
Package Size: mm2:W x L5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)1100 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)0.69 nV/rtHz
Vn at Flatband(Typ)0.69 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)0.78 mV

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: LMH6629SDEVAL
    Evaluation Board for the LMH6629
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Evaluation Modules & Boards: LMH730316
    LMH730316 Evaluation Board for High-Speed Single Op Amp in the 5-/6-Pin SOT-23 Package
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • AN-1604 Decompensated Operational Amplifiers (Rev. B)
    PDF, 206 Kb, Revisión: B, Archivo publicado: mayo 1, 2013
    This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented.
  • OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)
    PDF, 594 Kb, Revisión: F, Archivo publicado: mayo 1, 2013
    This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers.
  • Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)
    PDF, 153 Kb, Revisión: A, Archivo publicado: mayo 16, 2017
    This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
  • Considerations for High-Gain Multistage Designs
    PDF, 347 Kb, Archivo publicado: mayo 13, 2013

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)