Datasheet Texas Instruments TPS63000DRCTG4 — Ficha de datos

FabricanteTexas Instruments
SerieTPS63000
Numero de parteTPS63000DRCTG4
Datasheet Texas Instruments TPS63000DRCTG4

96% Convertidor Buck-Boost con interruptores de corriente 1.8A en 3x3 QFN 10-VSON -40 a 85

Hojas de datos

TPS6300x High-Efficient Single Inductor Buck-Boost Converter With 1.8-A Switches datasheet
PDF, 1.1 Mb, Revisión: C, Archivo publicado: oct 30, 2015
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin10
Package TypeDRC
Industry STD TermVSON
JEDEC CodeS-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingBPT
Width (mm)3
Length (mm)3
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Duty Cycle(Max)100 %
Iout(Max)0.8 A
Iq(Typ)0.04 mA
Operating Temperature Range-40 to 85 C
Package GroupVSON
RatingCatalog
Special FeaturesEnable,Frequency Synchronization,Light Load Efficiency,Load Disconnect,Synchronous Rectification,UVLO Fixed
Switch Current Limit(Min)1.2 A
Switch Current Limit(Typ)1.8 A
Switching Frequency(Max)1500 kHz
Switching Frequency(Min)1250 kHz
TopologyBuck/Boost
TypeConverter
Vin(Max)5.5 V
Vin(Min)1.8 V
Vout(Max)5.5 V
Vout(Min)1.2 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: TPS63000EVM-148
    TPS63000 5.5V Input, 3.3V Output, 1A Buck-Boost Converter Evaluation Module Board
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Dynamically Adjustable Output Using the TPS63000
    PDF, 188 Kb, Archivo publicado: agosto 15, 2006
    This application report provides a schematic and design procedure for implementing a dynamically adjustable output for the TPS63000 using a digital-to-analog converter or other input voltage source.
  • Fully integrated TPS6300x buck-boost converter extends Li-ion battery life
    PDF, 168 Kb, Archivo publicado: oct 10, 2006
  • Low-power TEC driver
    PDF, 75 Kb, Archivo publicado: nov 18, 2014
    TPS63020 Low Power TEC Driver
  • High Efficiency DCDC Converter Reference Design for Stellaris (Rev. A)
    PDF, 952 Kb, Revisión: A, Archivo publicado: abr 7, 2010
  • Extending the Soft Start Time in the TPS63010 Buck-Boost Converter
    PDF, 262 Kb, Archivo publicado: dic 5, 2012
  • TMS320DM355 DSP Power Reference Design PR742 (Rev. A)
    PDF, 199 Kb, Revisión: A, Archivo publicado: agosto 8, 2008
    This reference design is for the TMS320DM335/DM355 digital signal processor (DSP) and accounts for voltage, current, and sequencing requirements. The operating input voltage ranges from 2 V to 5.5 V for Li-ion batteries and 3 AA batteries. This design also can work with 2 AA batteries with some limitations. The design is optimized for efficiency over the full range of operation and low overall cos
  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, Revisión: B, Archivo publicado: jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, Archivo publicado: sept 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, Archivo publicado: abr 26, 2012
  • QFN and SON PCB Attachment (Rev. B)
    PDF, 821 Kb, Revisión: B, Archivo publicado: agosto 24, 2018
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Archivo publicado: jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.
  • 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B)
    PDF, 961 Kb, Revisión: B, Archivo publicado: jun 14, 2010
    This reference design is presented to help application designers and others who are trying to use the MSP430 in a system with an input voltage in the range of 1.8 V to 5.5 V, and who must increase the application run time by making use of the complete battery voltage range while still maintaining high efficiency over the entire battery life.

Linea modelo

Serie: TPS63000 (4)

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost, Inverting or Split-Rail Converter (Integrated Switch)