Datasheet Texas Instruments CD74ACT273SM96 — Ficha de datos

FabricanteTexas Instruments
SerieCD74ACT273
Numero de parteCD74ACT273SM96
Datasheet Texas Instruments CD74ACT273SM96

Chanclas Octal tipo D con reinicio 20-SSOP -55 a 125

Hojas de datos

Octal D Flip-Flop with Reset datasheet
PDF, 944 Kb, Revisión: B, Archivo publicado: jul 1, 2002
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin20
Package TypeDB
Industry STD TermSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingACT273SM
Width (mm)5.3
Length (mm)7.2
Thickness (mm)1.95
Pitch (mm).65
Max Height (mm)2
Mechanical DataDescargar

Paramétricos

3-State OutputNo
Bits8
F @ Nom Voltage(Max)90 Mhz
ICC @ Nom Voltage(Max)0.08 mA
Operating Temperature Range-55 to 125 C
Output Drive (IOL/IOH)(Max)24/-24 mA
Package GroupSSOP
Package Size: mm2:W x L20SSOP: 56 mm2: 7.8 x 7.2(SSOP) PKG
RatingCatalog
Schmitt TriggerNo
Technology FamilyACT
VCC(Max)5.5 V
VCC(Min)1.5 V
Voltage(Nom)5 V
tpd @ Nom Voltage(Max)12.3 ns

Plan ecológico

RoHSObediente

Notas de aplicación

  • Selecting the Right Level Translation Solution (Rev. A)
    PDF, 313 Kb, Revisión: A, Archivo publicado: jun 22, 2004
    Supply voltages continue to migrate to lower nodes to support today's low-power high-performance applications. While some devices are capable of running at lower supply nodes others might not have this capability. To haveswitching compatibility between these devices the output of each driver must be compliant with the input of the receiver that it is driving. There are several level-translati
  • Power-Up Behavior of Clocked Devices (Rev. A)
    PDF, 34 Kb, Revisión: A, Archivo publicado: feb 6, 2015
  • Using High Speed CMOS and Advanced CMOS in Systems With Multiple Vcc
    PDF, 43 Kb, Archivo publicado: abr 1, 1996
    Though low power consumption is a feature of CMOS devices sometimes this feature does not meet a designer?s system power supply constraints. Therefore a partial system power down or multiple Vcc supplies are used to meet the needs of the system. This document shows electrostatic discharge protection circuits. It also provides circuit and bus driver examples of partial system power down and curren

Linea modelo

Clasificación del fabricante

  • Semiconductors > Logic > Flip-Flop/Latch/Register > D-Type Flip-Flop