Datasheet Texas Instruments BUF634PG4 — Ficha de datos

Memoria intermedia de alta velocidad de 250 mA 8-PDIP -40 a 125

Hojas de datos

PDF, 1.2 Mb, Revisión: A, Archivo publicado: nov 25, 2015

Extracto del documento

Estado del ciclo de vida	Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	No

Diff Gain	0.4 %
Diff Phase	0.1 deg
Number of Channels	1
Operating Temperature Range	-40 to 125 C
Output Current(Typ)	250 mA
Package Group	PDIP
Package Size: mm2:W x L	See datasheet (PDIP) PKG
Rating	Catalog
Vs(Max)	36 V
Vs(Min)	4.5 V

RoHS

Obediente

Descargar
Add Current Limit to the BUF634
PDF, 63 Kb, Archivo publicado: sept 27, 2000
Modern buffer amplifiers, such as the BUF634, are often used with op amps to drive high-current demand loads such as cables or eletro-mechanical devices. BUF634 features internal overload protection to prevent its destruction under fault conditions. Internal current limit protects circuitry and wirebonds from excessive current. Internal over-temp shut down protects the device from excessive temper
Descargar
Combining an Amplifier with the BUF634
PDF, 72 Kb, Archivo publicado: oct 2, 2000
The following application note descibes a combination using an op amp with the high-speed buffer BUF634 located in its feedback loop. Depending upon the op amp selected, large signals with output currents of over 500mA into the MHz range can be attained.
Descargar
Power Amplifier Stress and Power Handling Limitations
PDF, 55 Kb, Archivo publicado: sept 27, 2000
To achieve reliable power amplifier designs you must consider the stress on the amplifier compared to its power handling limitations. Power handling limits are specified by the Safe Operating Area (SOA) curves of the power amp. Stress on the amplifier depends on amplifier load and signal conditions which can be evaluated with straightforward techniques.

Serie: BUF634 (12)