Datasheet Texas Instruments SN74LVC1G74DCUT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN74LVC1G74 |
| Numero de parte | SN74LVC1G74DCUT |
Flip-Flop tipo D de borde positivo disparado solo con 8-VSSOP claro y preestablecido -40 a 125
Hojas de datos
SN74LVC1G74 Single Positive-Edge-Triggered D-Type Flip-Flop with Clear and Preset datasheet
PDF, 1.3 Mb, Revisión: E, Archivo publicado: enero 25, 2015
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 8 | 8 |
| Package Type | DCU | DCU |
| Industry STD Term | VSSOP | VSSOP |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R |
| Device Marking | N74Q | N74R |
| Width (mm) | 2 | 2 |
| Length (mm) | 2.3 | 2.3 |
| Thickness (mm) | .85 | .85 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | .9 | .9 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| 3-State Output | No |
| Bits | 1 |
| F @ Nom Voltage(Max) | 150 Mhz |
| Gate Type | FLIP-FLOP |
| ICC @ Nom Voltage(Max) | 0.01 mA |
| Logic | True |
| Operating Temperature Range | -40 to 125 C |
| Output Drive (IOL/IOH)(Max) | 32/-32 mA |
| Package Group | VSSOP |
| Package Size: mm2:W x L | 8VSSOP: 6 mm2: 3.1 x 2(VSSOP) PKG |
| Rating | Catalog |
| Schmitt Trigger | No |
| Special Features | Ioff,down translation to Vcc,low power |
| Sub-Family | D-Type Flip-Flop |
| Technology Family | LVC |
| VCC(Max) | 5.5 V |
| VCC(Min) | 1.65 V |
| Voltage(Nom) | 1.8,2.5,3.3,5 V |
| tpd @ Nom Voltage(Max) | 13.4,7.1,5.9,4.1 ns |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- LVC Characterization InformationPDF, 114 Kb, Archivo publicado: dic 1, 1996
This document provides characterization information about low-voltage logic (LVL) that operates from a 3.3-V power supply. It addresses the issues of interfacing to 5-V logic ac performance power considerations input and output characteristics and signal integrity for this family of devices. - Use of the CMOS Unbuffered Inverter in Oscillator CircuitsPDF, 796 Kb, Archivo publicado: nov 6, 2003
CMOS devices have a high input impedance high gain and high bandwidth. These characteristics are similar to ideal amplifier characteristics and hence a CMOS buffer or inverter can be used in an oscillator circuit in conjunction with other passive components. Now CMOS oscillator circuits are widely used in high-speed applications because they are economical easy to use and take significantly
Linea modelo
Serie: SN74LVC1G74 (7)
Clasificación del fabricante
- Semiconductors > Logic > Little Logic