Datasheet Texas Instruments THS4011IDG4 — Ficha de datos

FabricanteTexas Instruments
SerieTHS4011
Numero de parteTHS4011IDG4
Datasheet Texas Instruments THS4011IDG4

Amplificador de retroalimentación de voltaje de baja distorsión de 290 MHz 8-SOIC -40 a 85

Hojas de datos

290-MHz Low-Distortion High-Speed Amplifiers datasheet
PDF, 1.4 Mb, Revisión: E, Archivo publicado: abr 12, 2010
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking4011I
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

2nd Harmonic80 dBc
3rd Harmonic80 dBc
@ MHz1
Acl, min spec gain1 V/V
Additional FeaturesN/A
ArchitectureBipolar,Voltage FB
BW @ Acl290 MHz
CMRR(Min)82 dB
CMRR(Typ)110 dB
GBW(Typ)290 MHz
Input Bias Current(Max)6000000 pA
Iq per channel(Max)9.5 mA
Iq per channel(Typ)7.8 mA
Number of Channels1
Offset Drift(Typ)15 uV/C
Operating Temperature Range-40 to 85,0 to 70 C
Output Current(Typ)110 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)310 V/us
Total Supply Voltage(Max)30 +5V=5, +/-5V=10
Total Supply Voltage(Min)10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)7.5 nV/rtHz
Vn at Flatband(Typ)7.5 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)6 mV

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: THS4011EVM
    THS4011 High Speed Amplifier Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Nulling Input Offset Voltage of Operational Amplifiers
    PDF, 94 Kb, Archivo publicado: agosto 2, 2000
    The input offset voltage of operational amplifiers (op-amps) arises from unavoidable mismatches in the differential input stage of the op-amp circuit caused by mismatched transistor pairs, collector currents, current-gain betas(B), collector or emitter resistors, etc. This application report describes the effects of mismatched components on the input offset voltage, and proposes using an external
  • Using a Decompensated Operational Amplifier for Improved Performance
    PDF, 161 Kb, Archivo publicado: marzo 30, 2001
    Decompensated operational amplifiers have improved noise, slew rate, harmonic distortion, etc., but required external compensation for stable operation. This report shows how to compensate such an amplifier and achieve the performance enchancement it provides in a unity-gain configuration.The THS4011 and THS4021 operational amplifiers are used to illustrate the superior performance mentioned a
  • Using a decompensated op amp for improved performance
    PDF, 352 Kb, Archivo publicado: marzo 11, 2005
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)