Datasheet Texas Instruments THS4304DRG4 — Ficha de datos

FabricanteTexas Instruments
SerieTHS4304
Numero de parteTHS4304DRG4
Datasheet Texas Instruments THS4304DRG4

Amplificador operacional de banda ancha 8-SOIC -40 a 85

Hojas de datos

THS4304: Wideband Operational Amplifier datasheet
PDF, 1.5 Mb, Revisión: A, Archivo publicado: jul 30, 2004
Extracto del documento

Precios

Estado

Estado del ciclo de vidaObsoleto (El fabricante ha interrumpido la producción del dispositivo)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

2nd Harmonic(dBc)84
3rd Harmonic(dBc)100
@ MHz10
Acl, min spec gain(V/V)1
Additional FeaturesN/A
Approx. Price (US$)2.41 | 1ku
ArchitectureBipolar
Voltage FB
BW @ Acl(MHz)3000
CMRR(Min)(dB)80
CMRR(Typ)(dB)95
GBW(Typ)(MHz)3000
Input Bias Current(Max)(pA)12000000
Iq per channel(Max)(mA)18.9
Iq per channel(Typ)(mA)18
Number of Channels(#)1
Offset Drift(Typ)(uV/C)5
Operating Temperature Range(C)-40 to 85
Output Current(Typ)(mA)100
Package GroupSOIC
Package Size: mm2:W x L (PKG)8SOIC: 29 mm2: 6 x 4.9(SOIC)
Rail-to-RailIn
Out
RatingCatalog
Slew Rate(Typ)(V/us)790
Total Supply Voltage(Max)(+5V=5, +/-5V=10)5
Total Supply Voltage(Min)(+5V=5, +/-5V=10)2.7
Vn at Flatband(Typ)(nV/rtHz)2.4
Vos (Offset Voltage @ 25C)(Max)(mV)4

Plan ecológico

RoHSDesobediente
Pb gratisNo

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: THS4304DGKEVM
    THS4304 Evaluation Module for DGK Package
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Evaluation Modules & Boards: THS4304DBVEVM
    THS4304 Evaluation Module for DBV Package
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • RF and IF amplifiers with op amps
    PDF, 177 Kb, Archivo publicado: feb 28, 2005
  • Wideband Complementary Current Output DAC Single-Ended Interface
    PDF, 597 Kb, Archivo publicado: jun 21, 2005
    High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revisión: A, Archivo publicado: enero 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)