Datasheet Texas Instruments TLV2361CDBVT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TLV2361 |
| Numero de parte | TLV2361CDBVT |
Amplificador operacional único de alto rendimiento y bajo voltaje 5-SOT-23 0 a 70
Hojas de datos
High-Performance Low-Voltage Operational Amplifiers datasheet
PDF, 1.3 Mb, Revisión: H, Archivo publicado: jun 27, 2007
Extracto del documento
Precios
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 5 | 5 | 5 |
| Package Type | DBV | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 250 | 250 | 250 |
| Carrier | SMALL T&R | SMALL T&R | SMALL T&R |
| Device Marking | YC3L | YC3G | YC3B |
| Width (mm) | 1.6 | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 | 1.45 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 85 dB |
| CMRR(Typ) | 60 dB |
| GBW(Typ) | 7 MHz |
| Input Bias Current(Max) | 150000 pA |
| Iq per channel(Max) | 2.5 mA |
| Iq per channel(Typ) | 1.75 mA |
| Number of Channels | 1 |
| Operating Temperature Range | -40 to 85,0 to 70 C |
| Output Current(Typ) | 1.2 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 3 V/us |
| Total Supply Voltage(Max) | 5 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 6 mV |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)PDF, 197 Kb, Revisión: A, Archivo publicado: marzo 12, 2001
This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation. - Conditioning a Switch-mode Power Supply Current Signal Using TI Op AmpsPDF, 61 Kb, Archivo publicado: marzo 23, 2000
The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp. - Use of Rail-to-Rail Operational Amplifiers (Rev. A)PDF, 159 Kb, Revisión: A, Archivo publicado: dic 22, 1999
This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.
Linea modelo
Serie: TLV2361 (6)
- TLV2361CDBV TLV2361CDBVR TLV2361CDBVT TLV2361IDBV TLV2361IDBVR TLV2361IDBVT
Clasificación del fabricante
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps