Datasheet Texas Instruments TPS61072DDCR — Ficha de datos

FabricanteTexas Instruments
SerieTPS61072
Numero de parteTPS61072DDCR
Datasheet Texas Instruments TPS61072DDCR

Ajustable, interruptor de 600 mA, convertidor de refuerzo PFM / PWM eficiente al 90% en ThinSOT-23 6-SOT-23-THIN -40 a 85

Hojas de datos

TPS6107x 90% Efficient Synchronous Boost Converter With 600-mA Switch datasheet
PDF, 1.1 Mb, Revisión: E, Archivo publicado: marzo 25, 2015
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin6
Package TypeDDC
Industry STD TermSOT-23-THIN
JEDEC CodeR-PDSO-G
Package QTY3000
CarrierLARGE T&R
Device MarkingBUM
Width (mm)1.6
Length (mm)2.9
Thickness (mm).87
Pitch (mm).95
Max Height (mm)1.1
Mechanical DataDescargar

Paramétricos

Duty Cycle(Max)100 %
Iq(Typ)0.019 mA
Operating Temperature Range-40 to 85 C
Package GroupSOT-23-THIN
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Light Load Efficiency,Load Disconnect
Switch Current Limit(Min)0.5 A
Switch Current Limit(Typ)0.7 A
Switching Frequency(Max)720 kHz
Switching Frequency(Min)480 kHz
TypeConverter
Vin(Max)5.5 V
Vin(Min)0.9 V
Vout(Max)5.5 V
Vout(Min)1.8 V

Plan ecológico

RoHSObediente

Notas de aplicación

  • How to Choose the Appropriate TPS6107x for your Application
    PDF, 87 Kb, Archivo publicado: feb 27, 2007
  • Accurately measuring efficiency of ultralow-IQ devices
    PDF, 254 Kb, Archivo publicado: enero 22, 2014
  • Five Steps to a Good PCB Layout of the Boost Converter
    PDF, 701 Kb, Archivo publicado: mayo 3, 2016
  • Minimizing Ringing at the Switch Node of a Boost Converter
    PDF, 201 Kb, Archivo publicado: sept 15, 2006
    The application report explains how to use proper board layout and/or a snubber to reduce high-frequency ringing at the switch node of a boost converter.
  • Design considerations for a resistive feedback divider in a DC/DC converter
    PDF, 393 Kb, Archivo publicado: abr 26, 2012
  • Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    PDF, 186 Kb, Revisión: C, Archivo publicado: enero 8, 2014
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.
  • Optimizing Transient Response of Internally Compensated DC-DC Converters (Rev. A)
    PDF, 1.1 Mb, Revisión: A, Archivo publicado: mayo 11, 2015
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, Archivo publicado: jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Serie: TPS61072 (1)
  • TPS61072DDCR

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Converter (Integrated Switch)