Datasheet Texas Instruments LM10CWM — Ficha de datos

FabricanteTexas Instruments
SerieLM10
Numero de parteLM10CWM
Datasheet Texas Instruments LM10CWM

Amplificador operacional y referencia de voltaje 14-SOIC 0 a 70

Hojas de datos

Datasheet LM10
PDF, 3.2 Mb, Revisión: E, Archivo publicado: oct 30, 2015, Páginas: 37
Operational Amplifier and Voltage Reference
Extracto del documento

Precios

Estado

Estado del ciclo de vidaNRND (No recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin14
Package TypeNPA
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY50
CarrierTUBE
Device MarkingLM10CWM
Width (mm)7.498
Length (mm)8.992
Thickness (mm)2.301
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataDescargar

Reemplazos

ReplacementLM10CWM/NOPB
Replacement CodeS

Paramétricos

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)90 dB
CMRR(Typ)102 dB
GBW(Typ)0.05 MHz
Input Bias Current(Max)20000 pA
Iq per channel(Max)0.4 mA
Iq per channel(Typ)0.27 mA
Number of Channels1
Offset Drift(Typ)2 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)20 mA
Package GroupSOIC
Package Size: mm2:W x L14SOIC: 93 mm2: 10.325 x 8.9915(SOIC) PKG
Rail-to-RailIn to V-,Out
RatingCatalog
Slew Rate(Typ)0.2 V/us
Total Supply Voltage(Max)45 +5V=5, +/-5V=10
Total Supply Voltage(Min)1.1 +5V=5, +/-5V=10
Vn at 1kHz(Typ)50 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)2 mV

Plan ecológico

RoHSSee ti.com

Notas de aplicación

  • AN-211 New Op Amp Ideas (Rev. A)
    PDF, 1.4 Mb, Revisión: A, Archivo publicado: mayo 6, 2013
    An op amp and voltage reference capable of single supply operation down to 1.1V is introduced.Performance is uncompromised and compares favorably with standard, state-of-the-art devices. In adeparture from conventional approaches, the circuit can operate in a floating mode, powered by residualvoltages, independent of fixed supplies. A brief description of the IC design is given, but emphasis
  • AN-300 Simple Circuit Detects Loss of 4-20 mA Signal (Rev. B)
    PDF, 241 Kb, Revisión: B, Archivo publicado: abr 23, 2013
    Four-to-twenty milliampere current loops are commonly used in the process control industry. They takeadvantage of the fact that a remote amplifier can be powered by the same 4-20 mA current that it controlsas its output signal, thus using a single pair of wires for signal and power. Circuits for making 4-20 mAtransmitters are found in the LM10, LM163, and LH0045 data sheets.
  • AN-288 System-Oriented DC-DC Conversion Techniques (Rev. B)
    PDF, 833 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
    This application note discusses the operation of system-oriented DC-DC conversion techniques.
  • Applying a New Precision Op Amp
    PDF, 421 Kb, Archivo publicado: oct 4, 2004
  • Using ADC0808/809 8-Bit uP Compble ADCs w/8-Chan Analog Multiplexr (Rev. B)
    PDF, 1.4 Mb, Revisión: B, Archivo publicado: abr 22, 2013
    This application note discusses the use of the ADC0808/ADC0809 Data Acquisition Devices (DAD) withan 8-channel analog multiplexer.
  • Audio Applications of Linear Integrated Circuits
    PDF, 272 Kb, Archivo publicado: mayo 2, 2004
  • AN-298 Isolation Techniques for Signal Conditioning (Rev. B)
    PDF, 685 Kb, Revisión: B, Archivo publicado: mayo 6, 2013
    This application note provides information and examples of isolation techniques for signal conditioning.
  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, Revisión: B, Archivo publicado: abr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps