Datasheet Texas Instruments LM25085MY/NOPB — Ficha de datos

FabricanteTexas Instruments
SerieLM25085
Numero de parteLM25085MY/NOPB
Datasheet Texas Instruments LM25085MY/NOPB

4.5-42V Wide Vin, controlador de Buck PFET no síncrono a tiempo constante 8-MSOP-PowerPAD -40 a 125

Hojas de datos

LM25085 / -Q1 42V Constant On-Time PFET Buck Switching Controller datasheet
PDF, 1.7 Mb, Revisión: J, Archivo publicado: nov 3, 2014
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeDGN
Industry STD TermHVSSOP
JEDEC CodeS-PDSO-G
Package QTY1000
CarrierSMALL T&R
Device MarkingSVYB
Width (mm)3
Length (mm)3
Thickness (mm)1.02
Pitch (mm).65
Max Height (mm)1.1
Mechanical DataDescargar

Paramétricos

Control ModeConstant on-time (COT)
Duty Cycle(Max)100 %
Iout(Max)10 A
Iq(Typ)1.25 mA
Number of Phases1
Operating Temperature Range-40 to 125 C
Package GroupMSOP-PowerPAD
RatingCatalog
Regulated Outputs1
Special FeaturesAdjustable Current Limit,Frequency Synchronization
Switching Frequency(Max)1000 kHz
Switching Frequency(Min)50 kHz
TypeController
Vin(Max)42 V
Vin(Min)4.5 V
Vout(Max)42 V
Vout(Min)1.25 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: LM25085MYEVAL
    Evaluation Board for LM25085 - 42V Wide Vin Constant On-Time PFET Buck Switching Controller
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Automated Frequency Response Analyzer
    PDF, 939 Kb, Archivo publicado: oct 9, 2013
    This application report discusses a new method of doing stability Analysis testing by using basic labequipment, while not requiring any specific instruments.
  • Constant Current Constant Voltage Buck Converter w/LM25085 (Rev. A)
    PDF, 377 Kb, Revisión: A, Archivo publicado: abr 23, 2013
    In many applications, a constant-current constant-voltage (CC/CV) dc source is needed. The I-Vcharacteristic of a constant-current constant-voltage (CC/CV) source is shown in Figure 1. This applicationreport presents an external op-amp based accurate current limit circuit suitable for CC/CV operation whenthe required constant current range is very narrow.
  • Transient Response versus Ripple – An Analysis of Ripple Injection Techniques
    PDF, 2.9 Mb, Archivo publicado: abr 28, 2014
    In this application note the implications of ripple injection techniques, aimed at minimizingoutput ripple voltage, on the transient response of a supply are highlighted. The results help choose a suitable ripple injection technique after striking a balance between the output ripple voltage and the transient response required by the load.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Controller (External Switch)