Datasheet Texas Instruments SN74CBTS16211DGGR — Ficha de datos

FabricanteTexas Instruments
SerieSN74CBTS16211
Numero de parteSN74CBTS16211DGGR
Datasheet Texas Instruments SN74CBTS16211DGGR

Interruptor de bus FET de 24 bits con sujeción de diodo Schottky 56-TSSOP -40 a 85

Hojas de datos

24-Bit FET Bus Switch With Schottky Diode Clamping datasheet
PDF, 336 Kb, Revisión: D, Archivo publicado: oct 20, 2000
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin56
Package TypeDGG
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingCBTS16211
Width (mm)6.1
Length (mm)14
Thickness (mm)1.15
Pitch (mm).5
Max Height (mm)1.2
Mechanical DataDescargar

Paramétricos

Additional FeaturesSchottky clamp diode to prevent undershoot
Bandwidth200 MHz
Configuration1:1 SPST
Input/Ouput Voltage(Max)5.5 V
Input/Output Continuous Current(Max)128 mA
Input/Output OFF-state Capacitance(Typ)5.5 pF
Number of Channels24
OFF-state leakage current(Max)1 µA
ON-state leakage current(Max)150 µA
Operating Temperature Range-40 to 85 C
Package GroupTSSOP
Package Size: mm2:W x L56TSSOP: 113 mm2: 8.1 x 14(TSSOP) PKG
RatingCatalog
Ron(Max)20 Ohms
Ron(Typ)5 Ohms
Supply Current(Max)3 uA
Supply Range5.5 Max
VIH(Min)2 V
VIL(Max)0.8 V
Vdd(Max)5.5 V
Vdd(Min)4 V
Vss(Max)N/A V
Vss(Min)N/A V

Plan ecológico

RoHSObediente

Notas de aplicación

  • Flexible Voltage-Level Translation With CBT Family Devices
    PDF, 40 Kb, Archivo publicado: jul 20, 1999
    Voltage translation between buses with incompatible logic levels can be accomplished using Texas Instruments (TI) translation-voltage clamps (TVC) or standard crossbar technology (CBT) devices. CBT devices in this application offer flexibility in designs, protection of circuits that are sensitive to high-state voltage-level overshoots, and cost efficiency.
  • 5-V To 3.3-V Translation With the SN74CBTD3384 (Rev. B)
    PDF, 35 Kb, Revisión: B, Archivo publicado: marzo 1, 1997
    The emergence of low-voltage technology required existing 5-V systems to interact with 3.3-V systems. Compatibility issues of mixed-mode operation created the need for 5-V to 3.3-V translation. Buffers and transceivers serve as effective translators. While providing additional drive, these devices also add propagation delay and require directional control. In cases where additional drive is not
  • 3.3-V to 2.5-V Translation with Texas Instruments Crossbar Technology (Rev. A)
    PDF, 32 Kb, Revisión: A, Archivo publicado: abr 3, 1998
  • Bus FET Switch Solutions for Live Insertion Applications
    PDF, 300 Kb, Archivo publicado: feb 7, 2003
    In today?s competitive computing and networking industry, any equipment downtime due to component interconnects or bus failures impedes communication, hinders productivity and hampers financial growth. In recognizing this increasingly costly unplanned downtime, the industry introduced live-insertion technology to minimize the impact of any such failures. The live-insertion feature enables a networ

Linea modelo

Clasificación del fabricante

  • Semiconductors > Switches and Multiplexers > Analog Switches/Muxes