Datasheet Texas Instruments TLV2548IDWR — Ficha de datos

FabricanteTexas Instruments
SerieTLV2548
Numero de parteTLV2548IDWR
Datasheet Texas Instruments TLV2548IDWR

12-Bit 200 kSPS ADC Ser.

Hojas de datos

2.7-V to 5.5-V 12-Bit 200 KSPS 4-/8-Channel Low-Power Serial Converters datasheet
PDF, 1.7 Mb, Revisión: E, Archivo publicado: jun 3, 2003
Extracto del documento

Precios

Descripción detallada

Salida, Auto Pwrdn (S / W y H / W), Baja potencia W / 8 x FIFO W / 8 Ch. 20-SOIC -40 a 85

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin20
Package TypeDW
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device Marking2548I
Width (mm)7.5
Length (mm)12.8
Thickness (mm)2.35
Pitch (mm)1.27
Max Height (mm)2.65
Mechanical DataDescargar

Paramétricos

# Input Channels8
Analog Voltage AVDD(Max)5.5 V
Analog Voltage AVDD(Min)2.7 V
ArchitectureSAR
Digital Supply(Max)5.5 V
Digital Supply(Min)2.7 V
INL(Max)1 +/-LSB
Input Range(Max)5.5 V
Input TypeSingle-Ended
Integrated FeaturesOscillator
InterfaceSPI
Multi-Channel ConfigurationMultiplexed
Operating Temperature Range-40 to 85,0 to 70 C
Package GroupSOIC
Package Size: mm2:W x L20SOIC: 132 mm2: 10.3 x 12.8(SOIC) PKG
Power Consumption(Typ)3.3 mW
RatingCatalog
Reference ModeExt,Int
Resolution12 Bits
SINAD70 dB
SNR70 dB
Sample Rate (max)200kSPS SPS
Sample Rate(Max)0.2 MSPS
THD(Typ)-82 dB

Plan ecológico

RoHSObediente

Notas de aplicación

  • Using the TMS320C5402 DMA Channels to Read From the TLV2548
    PDF, 142 Kb, Archivo publicado: mayo 16, 2000
    This application report presents a hardware and software solution for using the DMA channels of the 16-bit, fixed-point TMS320C5402 DSP to collect digital samples form the TLV2548 12-bit, 200-KSPS, 4/8-channel, low-power serial analog-to-digital converter.
  • Interfacing the TLV2544/TLV2548 ADC to the TMS320C5402 DSP (Rev. A)
    PDF, 154 Kb, Revisión: A, Archivo publicado: oct 26, 2000
    This application report presents a hardware and software solution for interfacing the TLV2544/TLV2548 12-bit, 200-ksps, 4-/8-channel, low-power, serial analog-to-digital converters to the 16-bit, fixed-point TMS320C5402 DSK.
  • Interfacing the TLV2544/TLV2548 ADC to the TMS320C31 DSP
    PDF, 579 Kb, Archivo publicado: oct 6, 2000
    This application report presents a hardware and software solution for interfacing the TLV2544/TLV2548 12-bit, 200Ksps, 4/8-channel, low-power, serial, successive approximation register (SAR) analog-to-digital converters (ADC) to the 32-bit floating point TMS320CX digital signal processor (DSP) through the use of the TMS320C31 DSP starter kit (DSK).A digital-to-analog converter (DAC) interface
  • Evaluating the TLV2462 and TLV2772 as Drive Amps for the TLV2544/TLV2548 ADC
    PDF, 63 Kb, Archivo publicado: jun 26, 2000
    This report presents a method for comparing the ac performance of the TLV2462 and TLV2772 operational amplifiers to the ac performance of the TLV2544/TLV2548 analog-to-digital converter.
  • Determining Minimum Acquisition Times for SAR ADCs, part 1 (Rev. A)
    PDF, 227 Kb, Revisión: A, Archivo publicado: nov 10, 2010
    This application report analyzes a simple method for calculating minimum acquisition times for successive-approximation register analog-to-digital converters (SAR ADCs). The input structure of the ADC is examined along with the driving circuit. The voltage on the sampling capacitor is then determined for the case when a step function is applied to the input of the driving circuit. Three different
  • Determining Minimum Acquisition Times for SAR ADCs, part 2
    PDF, 215 Kb, Archivo publicado: marzo 17, 2011
    The input structure circuit of a successive-approximation register analog-to-digital converter (SAR ADC) incombination with the driving circuit forms a transfer function that can be used to determine minimum acquisition times for different types of applied input signals. This application report, which builds on Determining Minimum Acquisition Times for SAR ADCs When a Step Function is Applied to

Linea modelo

Clasificación del fabricante

  • Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > Precision ADCs (<=10MSPS)