Datasheet Texas Instruments TPS60100PWPR — Ficha de datos

FabricanteTexas Instruments
SerieTPS60100
Numero de parteTPS60100PWPR
Datasheet Texas Instruments TPS60100PWPR

Convertidor DC / DC de bomba de carga de bajo ruido y alta potencia de 3,3 V regulado 20-HTSSOP -40 a 85

Hojas de datos

Regulated 3.3-V 200-mA Low-Noise Charge Pump DC/DC Converter datasheet
PDF, 1.0 Mb, Revisión: C, Archivo publicado: agosto 7, 2008
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin20
Package TypePWP
Industry STD TermHTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingTPS60100
Width (mm)4.4
Length (mm)6.5
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataDescargar

Paramétricos

Iout(Max)0.2 A
Iq(Typ)0.05 mA
Operating Temperature Range-40 to 85 C
Package GroupHTSSOP
RatingCatalog
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization
Switching Frequency(Max)400 kHz
Switching Frequency(Min)200 kHz
TypeCharge Pump
Vin(Max)3.6 V
Vin(Min)1.8 V
Vout(Max)3.3 V
Vout(Min)3.3 V

Plan ecológico

RoHSObediente

Notas de aplicación

  • Additional Negative Output with TPS601xx
    PDF, 64 Kb, Archivo publicado: marzo 26, 2001
    In addition to a main positive supply voltage, some applications also require a negative voltage at low current. The power-supply circuit should easily be able to provide the application with this additional supply voltage. This note discusses a simple way to derive a negative voltage from a charge pump dc/dc converter. An easy solution to stabilize the negative voltage is to use a shunt regulator
  • Powering the TMS320VC5402 DSP Using the TPS60100, TPS76918, and the TPS3305-18
    PDF, 61 Kb, Archivo publicado: dic 16, 1999
    This report analyzes a low-cost, low-power supply design utilizing the TPS60100 dc-to-dc converter, the TPS76918 series regulator, and the TPS3305-18 power-supply supervisor to power DSP applications.
  • TPS6010x/TPS6011x Charge Pump (Rev. A)
    PDF, 391 Kb, Revisión: A, Archivo publicado: dic 16, 1999
    Charge pumps are dc/dc converters that use a capacitor instead of an inductor or transformer for energy storage. They are able to generate positive or negative voltages from the input voltage. The input voltage can be multiplied by some factor such as 0.5, 2, 3, and so on, to generate the output voltage desired. Often, charge pumps and all related parts (including those used for energy storage) ar
  • PowerPAD Thermally Enhanced Package (Rev. H)
    PDF, 983 Kb, Revisión: H, Archivo publicado: jul 6, 2018
  • Extending the Soft Start Time Without a Soft Start Pin (Rev. B)
    PDF, 387 Kb, Revisión: B, Archivo publicado: jun 15, 2017
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revisión: A, Archivo publicado: dic 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Linea modelo

Serie: TPS60100 (3)

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Charge Pump (Inductorless)