Datasheet Texas Instruments TS3L501ERUAR — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | TS3L501E |
| Numero de parte | TS3L501ERUAR |
Conmutador LAN Gigabit Ethernet multiplexor / demultiplexor de 16 bits a 8 bits con modo de apagado 42-WQFN -40 a 85
Hojas de datos
TS3L501E 8-Channel SPDT/16-Bit to 8-Bit Multiplexer and Demultiplexer Ethernet LAN Switch With Power-Down Mode datasheet
PDF, 981 Kb, Revisión: B, Archivo publicado: mayo 27, 2016
Extracto del documento
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 42 |
| Package Type | RUA |
| Industry STD Term | WQFN |
| JEDEC Code | R-PQFP-N |
| Package QTY | 3000 |
| Carrier | LARGE T&R |
| Device Marking | TK501E |
| Width (mm) | 3.5 |
| Length (mm) | 9 |
| Thickness (mm) | .75 |
| Pitch (mm) | .5 |
| Max Height (mm) | .8 |
| Mechanical Data | Descargar |
Paramétricos
| Additional Features | Powered off protection |
| Bandwidth | 600 MHz |
| Bandwidth(Max) | 600 MHz |
| Configuration | 2:1 SPDT |
| ESD Charged Device Model | 4 kV |
| ESD HBM(Typ) | 6 kV |
| ICC(Max) | 600 uA |
| ICC(Typ) | 250 uA |
| Input/Ouput Voltage(Max) | 3.6 V |
| Input/Output Continuous Current(Max) | 128 mA |
| Input/Output OFF-state Capacitance(Typ) | 3 pF |
| Input/Output ON-state Capacitance(Typ) | 9 pF |
| Number of Channels | 8 |
| OFF-state leakage current(Max) | 1 µA |
| Operating Temperature Range | -40 to 85 C |
| Package Group | WQFN |
| Package Size: mm2:W x L | 42WQFN: 32 mm2: 3.5 x 9(WQFN) PKG |
| Propagation Delay | 0.3 ns |
| Protocols | 10 BASE-T,100 BASE-T,1000 BASE-T,LVDS |
| RON Flatness(Typ) | 0.7 Ohms |
| Ron Channel Match(Max) | 1.5 Ω |
| Ron(Max) | 8 Ohms |
| Ron(Typ) | 4 Ohms |
| Turn off Time (Disable)(Max) | 0.9 ns |
| Turn on Time (Enable)(Max) | 0.5 ns |
| VCC(Max) | 3.6 V |
| VCC(Min) | 3 V |
| VIH(Min) | 2 V |
| VIL(Max) | 0.8 V |
Plan ecológico
| RoHS | Obediente |
Notas de aplicación
- Preventing Excess Power Consumption on Analog SwitchesPDF, 238 Kb, Archivo publicado: jul 3, 2008
Analog switches are extensively used for switching audio signals in battery-powered applications, such as mobile phones. In any cases, the switch is powered directly from the battery, but it receives control signals from a lower voltage processor GPIO. For most analog switches, this application condition leads to an excess supply current draw that catches system designers by surprise. This applica
Linea modelo
Serie: TS3L501E (1)
- TS3L501ERUAR
Clasificación del fabricante
- Semiconductors > Switches and Multiplexers > Protocol Specific Switches/Muxes