Datasheet Texas Instruments SN65HVD10D — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | SN65HVD10 |
| Numero de parte | SN65HVD10D |
Transceptor RS-485 Half-duplex de 3.3 V, 32Mbps 8-SOIC -40 a 85
Hojas de datos
SNx5HVD1x 3.3-V RS-485 Transceivers datasheet
PDF, 1.2 Mb, Revisión: O, Archivo publicado: feb 1, 2017
Extracto del documento
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí |
Embalaje
| Pin | 8 |
| Package Type | D |
| Industry STD Term | SOIC |
| JEDEC Code | R-PDSO-G |
| Package QTY | 75 |
| Carrier | TUBE |
| Device Marking | VP10 |
| Width (mm) | 3.91 |
| Length (mm) | 4.9 |
| Thickness (mm) | 1.58 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 1.75 |
| Mechanical Data | Descargar |
Paramétricos
| Common Mode Range | -7 to 12 |
| Duplex | Half |
| Fail Safe | Idle,Open,Short |
| Fault Protection | -9 to 14 V |
| HBM ESD | 16 kV |
| ICC(Max) | 15.5 mA |
| IEC 61000-4-2 Contact | N/A +/- kV |
| Isolated | No |
| No. of RX | 1 |
| No. of TX | 1 |
| Number of Nodes | 64 |
| Operating Temperature Range | -40 to 125,-40 to 85 C |
| Package Group | SOIC |
| Rating | Catalog |
| Signaling Rate(Max) | 32 Mbps |
| Supply Voltage(s)(Nom) | 3.3 V |
Plan ecológico
| RoHS | Obediente |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: RS485-HF-DPLX-EVM
RS-485 Half-Duplex Evaluation Module
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Operating RS-485 Transceivers at Fast Signaling RatesPDF, 631 Kb, Archivo publicado: nov 15, 2004
The TIA/EIA-485-A standard specifies characteristics for RS-485 signaling. Most applications operate below 10 Mbps but it is often possible to signal at higher rates. This application report examines the constraints on high-speed signaling and presents results using the SN65HVD10 transceiver as one example transceiver. Our method is to measure the eye patterns at the end of a 10-m cable under vary - The RS-485 Unit Load and Maximum Number of Bus ConnectionsPDF, 197 Kb, Archivo publicado: marzo 15, 2004
The TIA/EIA-485 (RS-485) standard defines a Unit Load and confines bus configurations to 32. This report explains the Unit-Load concept and how it relates to the maximum number of bus connections. Fractional Unit-Load devices, such at the 1/8th Unit-Load SN65HVD21 and SN65HVD06, allow up to 256 devices on a single bus segment.
Linea modelo
Serie: SN65HVD10 (9)
Clasificación del fabricante
- Semiconductors > Interface > RS-485/RS-422