Datasheet Texas Instruments REG1117FA-2.5KTTT — Ficha de datos

FabricanteTexas Instruments
SerieREG1117A
Numero de parteREG1117FA-2.5KTTT
Datasheet Texas Instruments REG1117FA-2.5KTTT

1A Regulador positivo de baja caída 3-DDPAK / TO-263 0 a 125

Hojas de datos

REG1117: 800mA 1A Low Dropout Pos Regulator 1.8, 2.5, 2.85, 3.3, 5V, Adjustable datasheet
PDF, 846 Kb, Revisión: D, Archivo publicado: jul 21, 2004
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin33
Package TypeKTTKTT
Industry STD TermTO-263TO-263
JEDEC CodeR-PSFM-GR-PSFM-G
Package QTY5050
CarrierSMALL T&RSMALL T&R
Device Marking1117FA2.5REG
Width (mm)8.418.41
Length (mm)10.1810.18
Thickness (mm)4.444.44
Pitch (mm)2.542.54
Max Height (mm)4.834.83
Mechanical DataDescargarDescargar

Paramétricos

Accuracy2 %
Fixed Output Options1.8,2.5,5 V
Iout(Max)1 A
Iq(Typ)4 mA
Noise38 uVrms
Operating Temperature Range0 to 125 C
Output Capacitor TypeNon-Ceramic
Output OptionsAdjustable Output,Fixed Output
PSRR @ 100KHz29 dB
Package GroupDDPAK/TO-263
Package Size: mm2:W x L3DDPAK/TO-263: 155 mm2: 15.24 x 10.16(DDPAK/TO-263) PKG
RatingCatalog
Regulated Outputs1
Special FeaturesN/A
Thermal Resistance ОёJA65 В°C/W
Vdo(Typ)1200 mV
Vin(Max)15 V
Vin(Min)3.7 V
Vout(Max)13.8 V
Vout(Min)1.25 V

Plan ecológico

RoHSObediente

Notas de aplicación

  • An Easy Solution to Current Limiting an Op Amp
    PDF, 35 Kb, Archivo publicado: oct 2, 2000
    Many circuits today not only require voltage regulation but they also need current regulation. Some systems draw excessive current during power on, which can cause expensive system components to burn up due to improper powering of supplies. This is not the only problem associated with excessive currents. Some applications need to limit the current an op amp can provide to a specific load. This cir
  • LDO Noise Demystified (Rev. A)
    PDF, 785 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
    Thisapplicationreportexplainsthe differencebetweennoiseand PSRRof an LDO.It also explainsthedifferentwaysnoiseis specifiedin LDOdatasheetsandwhichspecificationshouldbe usedin theapplication.Finallyit explainshow LDOnoiseis reduced.
  • LDO PSRR Measurement Simplified (Rev. A)
    PDF, 131 Kb, Revisión: A, Archivo publicado: agosto 9, 2017
    This applicationreportexplainsdifferentmethodsof measuringthe PowerSupplyRejectionRatio(PSRR)of a Low-Dropout(LDO)regulatorand includesthe prosand consof thesemeasuringmethods
  • Packaging Limits Range of Linear Regulators
    PDF, 75 Kb, Archivo publicado: mayo 8, 2010
    The power limitations of the physical packaging for a linear regulator device can limit the total output current or the input-to-output voltage differential. This inherent limitation is not always apparent from the product data sheet and must be evaluated during the design phase. This application note shows how the package can limit the operating envelope of a linear regulator.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Power Management > Linear Regulator (LDO) > Single Channel LDO

Otros nombres:

REG1117FA2.5KTTT, REG1117FA 2.5KTTT