Datasheet Texas Instruments ADC10D040CIVS/NOPB — Ficha de datos

ADC10D040
www.ti.com SNAS149G – OCT 2001 – REVISED MARCH 2013 ADC10D040 Dual 10-Bit, 40 MSPS, 267 mW A/D Converter
Check for Samples: ADC10D040 FEATURES DESCRIPTION The ADC10D040 is a dual low power, high
performance CMOS analog-to-digital converter that
digitizes signals to 10 bits resolution at sampling
rates up to 45 MSPS while consuming a typical 267
mW from a single 3.3V supply. No missing codes is
specified over the full operating temperature range.
The unique two stage architecture achieves 9.4
Effective Bits over the entire Nyquist band at 40 MHz
sample rate. An output formatting choice of offset
binary or 2's complement coding and a choice of two
gain settings eases the interface to many systems.
Also allowing great flexibility of use is a selectable 10bit multiplexed or 20-bit parallel output mode. An
offset correction feature minimizes the offset error. 1 2 Internal Sample-and-Hold
Internal Reference Capability
Dual Gain Settings
Offset Correction
Selectable Offset Binary or 2's Complement
Output
Multiplexed or Parallel Output Bus
Single +3.0V to 3.6V Operation
Power Down and Standby Modes …