Datasheet Texas Instruments TLV342ID — Ficha de datos

FabricanteTexas Instruments
SerieTLV342
Numero de parteTLV342ID
Datasheet Texas Instruments TLV342ID

Amplificadores operacionales CMOS de bajo voltaje y salida de riel a riel 8-SOIC -40 a 125

Hojas de datos

TLV34xx Low-Voltage Rail-to-Rail Output CMOS Operational Amplifiers With Shutdown datasheet
PDF, 2.1 Mb, Revisión: D, Archivo publicado: abr 29, 2016
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device MarkingTY342
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDescargar

Paramétricos

Additional FeaturesN/A
ArchitectureCMOS
CMRR(Min)75 dB
CMRR(Typ)90 dB
GBW(Typ)2.2 MHz
Input Bias Current(Max)200 pA
Iq per channel(Max)0.15 mA
Iq per channel(Typ)0.07 mA
Number of Channels2
Offset Drift(Typ)1.9 uV/C
Operating Temperature Range-40 to 125 C
Output Current(Typ)113 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailOut
RatingCatalog
Slew Rate(Typ)0.9 V/us
Total Supply Voltage(Max)5.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)1.5 +5V=5, +/-5V=10
Vn at 1kHz(Typ)33 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)4 mV

Plan ecológico

RoHSObediente

Notas de aplicación

  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, Archivo publicado: marzo 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, Revisión: A, Archivo publicado: dic 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps