Datasheet Texas Instruments ADC12D500RFIUT — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | ADC12D500RF |
| Numero de parte | ADC12D500RFIUT |
12 bits, Dual 500-MSPS o Single 1.0-GSPS, Convertidor analógico a digital de muestreo de RF (ADC) 292-BGA -40 a 85
Hojas de datos
ADC12D800/500RF 12-Bit, 1.6/1.0 GSPS RF Sampling ADC datasheet
PDF, 2.0 Mb, Revisión: E, Archivo publicado: marzo 25, 2013
Extracto del documento
Estado
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | No |
Embalaje
| Pin | 292 |
| Package Type | NXA |
| Industry STD Term | BGA |
| JEDEC Code | S-PBGA-N |
| Package QTY | 40 |
| Carrier | JEDEC TRAY (10+1) |
| Device Marking | ADC12D500RFIUT |
| Width (mm) | 27 |
| Length (mm) | 27 |
| Thickness (mm) | 2.38 |
| Pitch (mm) | 1.27 |
| Max Height (mm) | 2.4 |
| Mechanical Data | Descargar |
Paramétricos
| # Input Channels | 2,1 |
| Analog Input BW | 2700 MHz |
| Architecture | Folding Interpolating |
| DNL(Max) | 0.4 +/-LSB |
| DNL(Typ) | 0.4 +/-LSB |
| ENOB | 9.7 Bits |
| INL(Max) | 2.5 +/-LSB |
| INL(Typ) | 2.5 +/-LSB |
| Input Buffer | Yes |
| Input Range | 0.8 Vp-p |
| Interface | Parallel LVDS |
| Operating Temperature Range | -40 to 85 C |
| Package Group | BGA |
| Package Size: mm2:W x L | 292BGA: 729 mm2: 27 x 27(BGA) PKG |
| Power Consumption(Typ) | 2020 mW |
| Rating | Catalog |
| Reference Mode | Int |
| Resolution | 12 Bits |
| SFDR | 74.3 dB |
| SINAD | 60 dB |
| SNR | 60.4 dB |
| Sample Rate(Max) | 500,1000 MSPS |
Plan ecológico
| RoHS | See ti.com |
Kits de diseño y Módulos de evaluación
- Evaluation Modules & Boards: ADC12D800RFRB
12-Bit, Dual 800 MSPS or Single 1.6 GSPS A/D Converter Reference Board
Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
Notas de aplicación
- Synchronizing the Giga-Sample ADCs Interfaced with Multiple FPGAsPDF, 943 Kb, Archivo publicado: agosto 6, 2014
- AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)PDF, 1.7 Mb, Revisión: A, Archivo publicado: abr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver. - From Sample Instant to Data Output: Understanding Latency in the GSPS ADCPDF, 392 Kb, Archivo publicado: dic 18, 2012
For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products, - AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)PDF, 169 Kb, Revisión: G, Archivo publicado: feb 3, 2017
- Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of MitigatPDF, 720 Kb, Archivo publicado: dic 9, 2013
The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12
Linea modelo
Serie: ADC12D500RF (2)
- ADC12D500RFIUT ADC12D500RFIUT/NOPB
Clasificación del fabricante
- Semiconductors > Data Converters > Analog-to-Digital Converters (ADCs) > High Speed ADCs (>10MSPS)