Datasheet Texas Instruments SN74CBTS6800PWR — Ficha de datos

FabricanteTexas Instruments
SerieSN74CBTS6800
Numero de parteSN74CBTS6800PWR
Datasheet Texas Instruments SN74CBTS6800PWR

Conmutador de bus FET de 10 bits con salidas precargadas y sujeción de diodo Schottky 24-TSSOP -40 a 85

Hojas de datos

10-Bit FET Bus Switch With Precharged Outputs And Schottky Diode Clamping datasheet
PDF, 730 Kb, Revisión: C, Archivo publicado: oct 20, 2000
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin24
Package TypePW
Industry STD TermTSSOP
JEDEC CodeR-PDSO-G
Package QTY2000
CarrierLARGE T&R
Device MarkingCS6800
Width (mm)4.4
Length (mm)7.8
Thickness (mm)1
Pitch (mm).65
Max Height (mm)1.2
Mechanical DataDescargar

Paramétricos

Additional FeaturesPre-charged signal path, Schottky clamp diode to prevent undershoot
Bandwidth200 MHz
Configuration1:1 SPST
Input/Ouput Voltage(Max)5.5 V
Input/Output Continuous Current(Max)128 mA
Input/Output OFF-state Capacitance(Typ)4.5 pF
Number of Channels10
Operating Temperature Range-40 to 85 C
Package GroupTSSOP
Package Size: mm2:W x L24TSSOP: 50 mm2: 6.4 x 7.8(TSSOP) PKG
RatingCatalog
Ron(Max)20 Ohms
Ron(Typ)3 Ohms
Supply Current(Max)2500 uA
Supply Current(Typ)2.5 uA
Supply Range5.5 Max
VIH(Min)2 V
VIL(Max)0.8 V
Vdd(Max)5.5 V
Vdd(Min)4 V
Vss(Max)N/A V
Vss(Min)N/A V

Plan ecológico

RoHSObediente

Notas de aplicación

  • FET Switches in Docking Stations
    PDF, 92 Kb, Archivo publicado: jul 23, 2003
    Docking stations for portable electronics require the capability to connect a system with a live-running bus to a disabled or powered-down system. This hot-docking event must not cause any electrical damage, electrical signal glitches, or data corruption. This application report explains the use of TI FET bus-switch products with precharge to accomplish this connection.
  • Flexible Voltage-Level Translation With CBT Family Devices
    PDF, 40 Kb, Archivo publicado: jul 20, 1999
    Voltage translation between buses with incompatible logic levels can be accomplished using Texas Instruments (TI) translation-voltage clamps (TVC) or standard crossbar technology (CBT) devices. CBT devices in this application offer flexibility in designs, protection of circuits that are sensitive to high-state voltage-level overshoots, and cost efficiency.
  • 5-V To 3.3-V Translation With the SN74CBTD3384 (Rev. B)
    PDF, 35 Kb, Revisión: B, Archivo publicado: marzo 1, 1997
    The emergence of low-voltage technology required existing 5-V systems to interact with 3.3-V systems. Compatibility issues of mixed-mode operation created the need for 5-V to 3.3-V translation. Buffers and transceivers serve as effective translators. While providing additional drive, these devices also add propagation delay and require directional control. In cases where additional drive is not
  • 3.3-V to 2.5-V Translation with Texas Instruments Crossbar Technology (Rev. A)
    PDF, 32 Kb, Revisión: A, Archivo publicado: abr 3, 1998
  • VOLTAGE LEVEL TRANSLATION (SL) - Family
    PDF, 111 Kb, Archivo publicado: sept 21, 2011
  • Bus FET Switch Solutions for Live Insertion Applications
    PDF, 300 Kb, Archivo publicado: feb 7, 2003
    In today?s competitive computing and networking industry, any equipment downtime due to component interconnects or bus failures impedes communication, hinders productivity and hampers financial growth. In recognizing this increasingly costly unplanned downtime, the industry introduced live-insertion technology to minimize the impact of any such failures. The live-insertion feature enables a networ

Linea modelo

Serie: SN74CBTS6800 (2)

Clasificación del fabricante

  • Semiconductors > Switches and Multiplexers > Analog Switches/Muxes