Datasheet Texas Instruments REG710NA-2.7/250 — Ficha de datos

FabricanteTexas Instruments
SerieREG710-27
Numero de parteREG710NA-2.7/250
Datasheet Texas Instruments REG710NA-2.7/250

Convertidor DC-DC de tapa conmutada de 30 mA con salida fija de 2.7 V 6-SOT-23 -40 a 85

Hojas de datos

REG710xx Buck-Boost Charge Pump with up to 60-mA Output Current datasheet
PDF, 1.2 Mb, Revisión: H, Archivo publicado: oct 30, 2015
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin6
Package TypeDBV
Industry STD TermSOT-23
JEDEC CodeR-PDSO-G
Package QTY250
CarrierSMALL T&R
Device MarkingR10F
Width (mm)1.6
Length (mm)2.9
Thickness (mm)1.2
Pitch (mm).95
Max Height (mm)1.45
Mechanical DataDescargar

Paramétricos

Iout(Max)0.03 A
Iq(Typ)0.065 mA
Operating Temperature Range-40 to 85 C
Package GroupSOT-23
RatingCatalog
Special FeaturesEnable
Switching Frequency(Max)1000 kHz
Switching Frequency(Min)1000 kHz
TopologyBuck/Boost
TypeCharge Pump
Vin(Max)5.5 V
Vin(Min)1.8 V
Vout(Max)2.7 V
Vout(Min)2.7 V

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: REG710EVM-33
    Evaluation Module For Buck-Boost Charge Pump REG710
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Evaluation Modules & Boards: REG710EVM-5
    Evaluation Module For Buck-Boost Charge Pump REG710-5
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Optimizing Output Voltage Ripple for the REG710
    PDF, 56 Kb, Archivo publicado: feb 10, 2003
    Many portable power applications require a power source that has buck?boost capability with low output ripple. For this application, the REG710 is a prime choice; however understanding the affects of the pump and output capacitors allows designers to take full advantage of theREG710?s capabilities in order to minimize output voltage ripple.
  • Using the TPS3619 with MSP430 Microcontrollers Can Reduce Sys Power Consumption (Rev. A)
    PDF, 37 Kb, Revisión: A, Archivo publicado: mayo 19, 2003
    The MSP430 series of microcontrollers are ideal in applications where battery life is critical. These microcontollers require only 0.1?A of current in low-power RAM retention mode; In this mode the microcontroller must have power to retain volatile memory. In some systems with charge pumps, the TPS3619 can be used to shut down the charge pump, saving system power consumption.

Linea modelo

Serie: REG710-27 (1)
  • REG710NA-2.7/250

Clasificación del fabricante

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost or Inverting Charge Pump (Inductorless)

Otros nombres:

REG710NA2.7/250, REG710NA 2.7/250