Datasheet Texas Instruments TMS320F28054PNS — Ficha de datos

Fabricante	Texas Instruments
Serie	TMS320F28054
Numero de parte	TMS320F28054PNS

Hojas de datos

Precios

Estado

Embalaje

Paramétricos

Plan ecológico

Kits de diseño y Módulos de evaluación

• JTAG Emulators/ Analyzers: TMDSEMU100V2U-20T
  XDS100v2 JTAG Debug Probe (20-pin cTI version)
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Daughter Cards: TMDXCNCD28055ISO
  Piccolo F2805x Isolated USB controlCARD
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Evaluation Modules & Boards: TMDXHVMTRKIT5X
  Piccolo F2805x High Voltage Motor Control Developer's Kit
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Evaluation Modules & Boards: TMDXDOCK28055
  Piccolo F2805x Experimenter Kit
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Evaluation Modules & Boards: TMDSCNCD28054MISO
  controlCARD with Piccolo TMS320F28054MPNT, InstaSPIN-FOC and InstaSPIN-MOTION enabled
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Evaluation Modules & Boards: TMDSCNCD28027F
  controlCARD with Piccolo TMS320F28027FPTT, InstaSPINВ™-FOC enabled
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Evaluation Modules & Boards: TMDSILPFCKIT
  C2000 2 Phase Interleaved Power Factor Correction Kit with integrated power metering
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• Evaluation Modules & Boards: TMDSSOLARUINVKIT
  Solar Micro Inverter Development Kit
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• Evaluation Modules & Boards: TMDSRSLVR
  C2000 Resolver to Digital Conversion Kit
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• JTAG Emulators/ Analyzers: C2000-GANG
  C2000 Gang Programmer
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
  • Descargar
• JTAG Emulators/ Analyzers: TMDSEMU100V2U-14T
  XDS100v2 JTAG Debug Probe (14-pin TI version)
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• JTAG Emulators/ Analyzers: TMDSEMU200-U
  XDS200 USB Debug Probe
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• JTAG Emulators/ Analyzers: TMDSEMU560V2STM-UE
  XDS560v2 System Trace USB & Ethernet Debug Probe
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  
• JTAG Emulators/ Analyzers: TMDSEMU560V2STM-U
  XDS560v2 System Trace USB Debug Probe
  Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  

Notas de aplicación

• Descargar
  Piccolo MCU CAN Module Operation Using the On-Chip Zero-Pin Oscillator (Rev. A)
  PDF, 43 Kb, Revisión: A, Archivo publicado: agosto 19, 2011
  CAN protocol imposes rather stringent requirements on its timing source, which are generally met by the provision of an external quartz crystal/oscillator. The TMS320C2803x/TMS320F2806x series of microcontrollers have an on-chip zero-pin oscillator that needs no external components. This application report describes how to use the CAN module with this oscillator to operate at the maximum bit rate
• Descargar
  Using the CAN Piccolo Bootloader at High Temperature
  PDF, 33 Kb, Archivo publicado: jun 29, 2015
  The Controller Area Network (CAN) protocol requires strict tolerances from reference bit clocks, which are generally met using quartz crystal oscillators or ceramic resonators. The TMS320F2803x, TMS320F2805x, and TMS320F2806x microcontrollers use an on-chip zero-pin oscillator with no external components as a reference clock for the CAN bootloader. This oscillator's tolerance is sufficient at room
• Descargar
  InstaSPIN(tm) BLDC Lab
  PDF, 1.4 Mb, Archivo publicado: nov 15, 2011
  For this lab we are using the Three Phase BLDC Motor Kit with DRV8312 and Piccolo MCU (DRV8312-C2-KIT) (the DRV8302-HC-C2-KIT or DRV8301-HC-C2-KIT can also be used) with a Piccolo F28035 controlCARD subsystem to run the sensorless InstaSPIN BLDC technique.These are the tasks that must be done to spin motors:Make sure all physical connections and jumper settings on the kit
• Descargar
  Programming Examples for the TMS320x28xx eCAN (Rev. B)
  PDF, 73 Kb, Revisión: B, Archivo publicado: sept 12, 2017
  The TMS320x28xx series of Microcontrollers/Digital Signal Controllers feature an on-chip enhanced Controller Area Network (eCAN) module. This module is a full-CAN controller, compliant with CAN specification 2.0B. This application report contains several programming examples, supplemental to those in C2000Ware/controlSUITE, to illustrate how the eCAN module is set up for different modes of operati
• Descargar
  Accelerators: Enhancing the Capabilities of the C2000 MCU Family Technical Brief (Rev. A)
  PDF, 155 Kb, Revisión: A, Archivo publicado: nov 8, 2016
  Engineers designing real-time control systems are constantly faced with the challenge of optimizing performance. These systems require minimal processing latency in order to meet the control loop performance specifications. At the heart of the control systems are math intensive algorithms which are used to calculate the control signals. Utilizing a microcontroller (MCU) that can quickly and effici
• Descargar
  Serial Flash Programming of C2000 Microcontrollers (Rev. B)
  PDF, 387 Kb, Revisión: B, Archivo publicado: feb 8, 2017
  Often times, embedded processors must be programmed in situations where JTAG is not a viable optionfor programming the target device. When this is the case, the engineer must rely on some type of serial programming solution. C2000 devices aid in this endeavor through their inclusion of several program loading utilities included in ROM. These utilities are useful, but only solve half of the progr
• Descargar
  EEPROM Emulation With the TMS320F28xxx DSCs
  PDF, 407 Kb, Archivo publicado: sept 21, 2009
  Many applications require storing small quantities of system related data (e.g., calibration values, device configuration) in a non-volatile memory, so that it can be used or modified and reused even after power cycling the system. EEPROMs are primarily used for this purpose. EEPROMs have the ability to erase and write individual bytes of memory many times over and the programmed locations retain
• Descargar
  Calculator for CAN Bit Timing Parameters
  PDF, 37 Kb, Archivo publicado: marzo 22, 2016
  Controller Area Network (CAN) nodes use user-specified timing parameters to sample the asynchronous bitstream and recover the clock. These parameters are typically based on the frequency of the available reference oscillator. There may be several options available for a given frequency, and some of them will allow a looser oscillator tolerance than others. This application report details the creat
• Descargar
  Programming External Nonvolatile Memory Using SDFlash for TMS320C28x Devices
  PDF, 2.0 Mb, Archivo publicado: nov 16, 2009
  The C28xxx generation of microcontrollers can connect to external nonvolatile memory through a variety of interfaces including parallel, serial peripheral interface (SPI), and inter-integrated circuit (I2C). This application report discusses how to write drivers for your external nonvolatile memory to allow for in-place programming using SDFlash, an application provided by Spectrum Digital, Inc. A
• Descargar
  TPS75005 Quick-Start Guide with C2000 Controllers
  PDF, 129 Kb, Archivo publicado: enero 17, 2012
  The TPS75005 is a complete power management solution for C2000 controllers from Texas Instruments. This document illustrates how to attach the TPS75005 to a C2000 controller.

Linea modelo

Clasificación del fabricante

• Semiconductors > Microcontrollers (MCU) > Performance MCUs > Real-time Control > Piccolo F2802x/3x/5x/6x/7x