Datasheet Texas Instruments TLV2362IP — Ficha de datos

FabricanteTexas Instruments
SerieTLV2362
Numero de parteTLV2362IP
Datasheet Texas Instruments TLV2362IP

Amplificador operacional dual de alto rendimiento y bajo voltaje 8-PDIP -40 a 85

Hojas de datos

High-Performance Low-Voltage Operational Amplifiers datasheet
PDF, 1.3 Mb, Revisión: H, Archivo publicado: jun 27, 2007
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin8
Package TypeP
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY50
CarrierTUBE
Device MarkingTLV2362IP
Width (mm)6.35
Length (mm)9.81
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataDescargar

Paramétricos

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)85 dB
CMRR(Typ)60 dB
GBW(Typ)7 MHz
Input Bias Current(Max)150000 pA
Iq per channel(Max)2.5 mA
Iq per channel(Typ)1.75 mA
Number of Channels2
Operating Temperature Range-40 to 85 C
Output Current(Typ)1.2 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)3 V/us
Total Supply Voltage(Max)5 +5V=5, +/-5V=10
Total Supply Voltage(Min)2 +5V=5, +/-5V=10
Vn at 1kHz(Typ)8 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)6 mV

Plan ecológico

RoHSObediente
Pb gratis

Notas de aplicación

  • Stability Analysis Of Voltage-Feedback Op Amps Including Compensation Technique (Rev. A)
    PDF, 197 Kb, Revisión: A, Archivo publicado: marzo 12, 2001
    This report presents an analysis of the stability of voltage-feedback operational amplifiers (op amps) using circuit performance as the criteria to attain a successful design. It discusses several compensation techniques for op amps with and without internal compensation.
  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, Archivo publicado: marzo 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, Revisión: A, Archivo publicado: dic 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Linea modelo

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps