Datasheet Texas Instruments LM318N/NOPB — Ficha de datos

FabricanteTexas Instruments
SerieLM318-N
Numero de parteLM318N/NOPB
Datasheet Texas Instruments LM318N/NOPB

Amplificador operacional 8-PDIP 0 a 70

Hojas de datos

LM118/LM218/LM318 Operational Amplifiers datasheet
PDF, 1.6 Mb, Revisión: C, Archivo publicado: marzo 20, 2013
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin88
Package TypePP
Industry STD TermPDIPPDIP
JEDEC CodeR-PDIP-TR-PDIP-T
Package QTY4040
CarrierTUBETUBE
Device MarkingLM318N
Width (mm)6.356.35
Length (mm)9.819.81
Thickness (mm)3.93.9
Pitch (mm)2.542.54
Max Height (mm)5.085.08
Mechanical DataDescargarDescargar

Paramétricos

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)70 dB
CMRR(Typ)100 dB
GBW(Typ)15 MHz
Input Bias Current(Max)500000 pA
Iq per channel(Max)10 mA
Iq per channel(Typ)4.5 mA
Number of Channels1
Offset Drift(Typ)6 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)20 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailNo
RatingCatalog
Slew Rate(Typ)70 V/us
Total Supply Voltage(Max)40 +5V=5, +/-5V=10
Total Supply Voltage(Min)10 +5V=5, +/-5V=10
Vn at 1kHz(Typ)15 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)10 mV

Plan ecológico

RoHSObediente

Notas de aplicación

  • Instrumentational Amplifiers (See also LMP8358)
    PDF, 76 Kb, Archivo publicado: oct 2, 2002
  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, Revisión: B, Archivo publicado: abr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • AN-446 A 150W IC Op Amp Simplifies Design of Power Circuits
    PDF, 782 Kb, Archivo publicado: mayo 10, 2004
    Application Note 446 A 150W IC Op Amp Simplifies Design of Power Circuits
  • Building an Op Amp With Bipolar Transistors, A Historical Application Note (Rev. A)
    PDF, 1.2 Mb, Revisión: A, Archivo publicado: sept 19, 2016
    It is well known that the voltage noise of an operational amplifier can be decreased by increasing the emitter currentof the input stage. The signal-to-noise ratio will be improved by the increase of bias, until the base current noise begins to dominate.

Linea modelo

Serie: LM318-N (4)

Clasificación del fabricante

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps