Datasheet Texas Instruments ADC10D1500 — Ficha de datos

Fabricante	Texas Instruments
Serie	ADC10D1500

Convertidor analógico a digital (ADC) de 10 bits, doble 1.5-GSPS o simple 3.0-GSPS

Hojas de datos

Descargar

PDF, 2.0 Mb, Revisión: Q, Archivo publicado: marzo 15, 2013

Extracto del documento

Precios

Estado

	ADC10D1500CIUT	ADC10D1500CIUT/NOPB
Estado del ciclo de vida	NRND (No recomendado para nuevos diseños)	Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante	No	Sí

Embalaje

	ADC10D1500CIUT	ADC10D1500CIUT/NOPB
N	1	2
Pin	292	292
Package Type	NXA	NXA
Industry STD Term	BGA	BGA
JEDEC Code	S-PBGA-N	S-PBGA-N
Package QTY	40	40
Carrier	JEDEC TRAY (10+1)	JEDEC TRAY (10+1)
Device Marking	CIUT	CIUT
Width (mm)	27	27
Length (mm)	27	27
Thickness (mm)	2.38	2.38
Pitch (mm)	1.27	1.27
Max Height (mm)	2.4	2.4
Mechanical Data	Descargar	Descargar

Paramétricos

Parameters / Models	ADC10D1500CIUT	ADC10D1500CIUT/NOPB
# Input Channels	2,1	2,1
Analog Input BW, MHz	2800	2800
Architecture	Folding Interpolating	Folding Interpolating
DNL(Max), +/-LSB	0.25	0.25
DNL(Typ), +/-LSB	0.25	0.25
ENOB, Bits	9	9
INL(Max), +/-LSB	0.65	0.65
INL(Typ), +/-LSB	0.65	0.65
Input Buffer	Yes	Yes
Input Range, Vp-p	0.8	0.8
Interface	Parallel LVDS	Parallel LVDS
Operating Temperature Range, C	-40 to 85	-40 to 85
Package Group	BGA	BGA
Package Size: mm2:W x L, PKG	292BGA: 729 mm2: 27 x 27(BGA)	292BGA: 729 mm2: 27 x 27(BGA)
Power Consumption(Typ), mW	3140	3140
Rating	Catalog	Catalog
Reference Mode	Int	Int
Resolution, Bits	10	10
SFDR, dB	68	68
SINAD, dB	56.1	56.1
SNR, dB	56.8	56.8
Sample Rate(Max), MSPS	1500,3000	1500,3000

Plan ecológico

	ADC10D1500CIUT	ADC10D1500CIUT/NOPB
RoHS	See ti.com	Obediente

Notas de aplicación

Descargar
Signal Chain Noise Figure Analysis
PDF, 615 Kb, Archivo publicado: oct 29, 2014
Descargar
AN-2128 ADC1xD1x00 Pin Compatibility (Rev. C)
PDF, 60 Kb, Revisión: C, Archivo publicado: mayo 1, 2013
In order to facilitate upgrading applications from a 10-bit Gig ADC to a 12-bit Gig ADC, the ADC10D1x00(ADC10D1500/ADC10D1000) is designed to be pin-compatible with the ADC12D1x00(ADC12D1800/1600/1000). This means that a single board layout may be designed with both resolutionADCs in mind for more cost efficient and time-to-market product development.
Descargar
AN-2177 Using the LMH6554 as a ADC Driver (Rev. A)
PDF, 1.7 Mb, Revisión: A, Archivo publicado: abr 26, 2013
This application report discusses the use of the Texas Instruments LMH6554 as an ADC driver.
Descargar
From Sample Instant to Data Output: Understanding Latency in the GSPS ADC
PDF, 392 Kb, Archivo publicado: dic 18, 2012
For many applications which use ultra high-speed ADCs, latency can be a critical performance specification. For example, if the ADC is used in any kind of feedback loop, then the absolute latency is an important factor. For a MIMO system such as a phased array radar, the relative difference and variability in latency becomes important. This application note covers latency in the GSPS ADC products,
Descargar
AN-2132 Synchronizing Multiple GSPS ADCs in a System: The AutoSync Feature (Rev. G)
PDF, 169 Kb, Revisión: G, Archivo publicado: feb 3, 2017
Descargar
Maximizing SFDR Performance in the GSPS ADC: Spur Sources and Methods of Mitigat
PDF, 720 Kb, Archivo publicado: dic 9, 2013
The SFDR performance of an ADC is limited by the largest spur in the spectrum from DC to Fs / 2. These spurs can either be reduced or avoided entirely for maximum SFDR performance, based on the application. This reference design explores the reason behind spurs in the 10-bit and 12-bit GSPS ADCfamily. The specific products covered are: ADC12D1800RF, ADC12D1600RF, ADC12D1000RF, ADC12D800RF, ADC12

Linea modelo

Serie: ADC10D1500 (2)

ADC10D1500CIUT ADC10D1500CIUT/NOPB

Clasificación del fabricante

Semiconductors> Data Converters> Analog-to-Digital Converters (ADCs)> High Speed ADCs (>10MSPS)