Datasheet Texas Instruments BQ76PL536A — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | BQ76PL536A |
Monitor de batería de iones de litio e IC de protección secundaria para sistemas eléctricos e híbridos
Hojas de datos
bq76PL536A 3-to-6 Series Cell Lithium-Ion Battery Monitor and Secondary Protection IC for Applications datasheet
PDF, 2.0 Mb, Revisión: C, Archivo publicado: oct 19, 2016
Extracto del documento
Precios
Estado
| BQ76PL536APAPR | BQ76PL536APAPT | |
|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí | No |
Embalaje
| BQ76PL536APAPR | BQ76PL536APAPT | |
|---|---|---|
| N | 1 | 2 |
| Pin | 64 | 64 |
| Package Type | PAP | PAP |
| Industry STD Term | HTQFP | HTQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 1000 | 250 |
| Carrier | LARGE T&R | SMALL T&R |
| Device Marking | BQ76PL536A | BQ76PL536A |
| Width (mm) | 10 | 10 |
| Length (mm) | 10 | 10 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Parameters / Models | BQ76PL536APAPR | BQ76PL536APAPT |
|---|---|---|
| Communication Interface | SPI | SPI |
| Function | Monitoring (Analog Front-End) | Monitoring (Analog Front-End) |
| Number of Series Cells, Max | 3 | 3 |
| Package Group | HTQFP | HTQFP |
| Protection Feature, s | Over-temperature (OT),Over-voltage (OV),Under-voltage (UV) | Over-temperature (OT),Over-voltage (OV),Under-voltage (UV) |
| Rating | Catalog | Catalog |
| Special Features | Cell Balancing,Integrated ADC,Programmable EEPROM or EPROM,Requires separate MCU,Stackable (built-in interface) | Cell Balancing,Integrated ADC,Programmable EEPROM or EPROM,Requires separate MCU,Stackable (built-in interface) |
| Typical Operating Current(Typ), uA | 45 | 45 |
| Vin(Max), V | 27 | 27 |
Plan ecológico
| BQ76PL536APAPR | BQ76PL536APAPT | |
|---|---|---|
| RoHS | Obediente | Obediente |
Notas de aplicación
- Improving Communications With the bq76PL536PDF, 158 Kb, Archivo publicado: agosto 11, 2010
The bq76PL536 is designed to communicate at high speed in noisy conditions present in automotive and industrial large-format battery applications. This document presents specific steps to maximize the integrity of communications with the bq76PL536 and reduce susceptibility to noise to a minimum, thereby reducing the bit-error rate to an acceptable level. - bq76PL536/536A/536AQ1 Communication Basics (Rev. B)PDF, 71 Kb, Revisión: B, Archivo publicado: jul 5, 2011
This application report discusses the communication basics of addressing, reading, and writing for the Texas Instruments bq76PL536, a stackable 3-to-6 series battery pack protector and analog front end. - Multi-Cell Li-Ion Battery Management System Using MSP430F5529 and bq76PL536PDF, 118 Kb, Archivo publicado: dic 16, 2010
This application report explains the implementation of a multi-cell lithium-ion battery management system using an MSP430(tm) microcontroller and the bq76PL536. The battery manager is implemented using the standard evaluation boards for the MSP430 MCU and the bq76PL536.The bq76PL536 can be stacked vertically to monitor up to 192 cells without additional isolation components between ICs. A high-s
Linea modelo
Serie: BQ76PL536A (2)
Clasificación del fabricante
- Semiconductors> Power Management> Battery Management Products> Battery Monitor, Protection & Authentication Solutions