Datasheet Texas Instruments CC1121RHBT — Ficha de datos

FabricanteTexas Instruments
SerieCC1121
Numero de parteCC1121RHBT
Datasheet Texas Instruments CC1121RHBT

Transceptor de bajo rendimiento Sub-1 GHz de alto rendimiento 32-VQFN -40 a 85

Hojas de datos

CC1121 High-Performance Low-Power RF Transceiver datasheet
PDF, 1.6 Mb, Revisión: F, Archivo publicado: sept 29, 2014
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

Pin32
Package TypeRHB
Industry STD TermVQFN
JEDEC CodeS-PQFP-N
Package QTY250
CarrierSMALL T&R
Device MarkingCC1121
Width (mm)5
Length (mm)5
Thickness (mm).9
Pitch (mm).5
Max Height (mm)1
Mechanical DataDescargar

Paramétricos

Data Rate(Max)200 kbps
Device TypeSmart RF Transceiver
Frequency Bands169,433,470,868,915,920 MHz
Operating Temperature Range-40 to 85 C
RX Current (Lowest)17 mA
RatingCatalog
Sensitivity (Best)-117 dBm
Special FeaturesN/A
TX Power(Max)16 dBm
TechnologySub-1 GHz
Throughput(Max)0.2 Mbps

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Daughter Cards: CC1121EMK-868-915
    CC1121 Evaluation Module Kit 868-915MHz
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Development Kits: CC1120DK
    Performance Line Development Kit
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)
  • Evaluation Modules & Boards: SMARTRFTRXEBK
    SmartRF Transceiver Evaluation Board
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • DN510 -- CC112X RSSI and CS Response Time
    PDF, 488 Kb, Archivo publicado: dic 5, 2012
  • Asynchronous Channel Hopping System for FCC 15.247 Compliance
    PDF, 482 Kb, Archivo publicado: jul 7, 2015
    This application report shows how to use the CC112x and CC12xx series of transceivers in a Frequency Hopping Spread Spectrum system. This allows for transmit powers up to 1 W and utilization of narrow channels for optimum range at the same time.
  • AN115 -- CC112x/CC1175/CC120x Operation in 274-320 MHz Frequency Band (Rev. A)
    PDF, 448 Kb, Revisión: A, Archivo publicado: jun 13, 2013
  • AN121 – Wireless M-Bus Implementation with CC112x/CC120x High Performance Transc
    PDF, 2.8 Mb, Archivo publicado: feb 20, 2013
  • CC112x/CC120x RX Sniff Mode (Rev. A)
    PDF, 836 Kb, Revisión: A, Archivo publicado: oct 9, 2013
    This application report shows how the RX Sniff Mode can be configured for different TX configurations and discusses how average power consumption can be estimated for a receiver implementing this mode. You are expected to have basic knowledge on how the enhanced Wake on Radio (eWOR) and the RX Sniff Mode are implemented in TI's Performance Line Sub-1 GHz RF family of devices.
  • DN403 -- CC112x/CC120x On-Chip Temperature Sensor (Rev. C)
    PDF, 161 Kb, Revisión: C, Archivo publicado: jun 26, 2014
    This application report provides the necessary information to use the temperature sensor of the CC112X and CC120X families. The temperature sensor is based on a proportional to absolute temperature (PTAT) current from a bandgap cell fed to a resistor to generate a PTAT voltage. It is possible to read out the temperature information either as an analog voltage on a general-purpose input/output (GPI
  • CC112X/CC120X On-Chip Battery Monitor
    PDF, 57 Kb, Archivo publicado: dic 3, 2014
    This application report provides the necessary information in order to use the voltage sensor of the CC112x and CC120x family. The voltage sensor can be used to monitor the supply and battery voltage (VDD).
  • CC112x/CC120x RX Sniff mode with Smart Preamble
    PDF, 278 Kb, Archivo publicado: oct 23, 2013
    This application report shows an innovative way to use the DualSync functionality of the CC112x/CC120x to handle a new kind of preamble. By using what is called SmartPreamble, the receiver is able to reliably detect exactly where it woke up in the preamble and use the eWOR timer to go back to sleep, and then wake up right before the sync word.
  • DN039 -- IPC for 868/915 MHz operation with the CC112x, CC117x and CC12xx
    PDF, 406 Kb, Archivo publicado: agosto 20, 2012
    CC1120, CC1121, CC1125, CC1175 DN039 -- Matched Integrated Passive Component for 868 / 915 MHz Operation With CC112x, PDF Source
  • DN040 -- Reduced Battery Current Using CC112x, CC1175_and CC1200 with TPS62730
    PDF, 454 Kb, Archivo publicado: oct 2, 2012
  • AN112 -- Using CC1190 Front End With CC112x/CC120x Under EN 300 220 (Rev. C)
    PDF, 606 Kb, Revisión: C, Archivo publicado: jun 21, 2013
    This application report outlines the expected performance when using a CC1120-CC1190 design underEN 300 220-1 V2.3.1 in the 869.4-869.65 MHz frequency sub-band (g3). The maximum allowed outputpower in the 869.4-869.65 MHz sub-band is +27 dBm (500 mW).For details on the regulatory limits in the 863-870 MHz SRD frequency bands, see the ETSI EN 300 220-1V2.3.1 and ERC recommendation 70-0
  • CC1120-CC1190 BoosterPack
    PDF, 3.0 Mb, Archivo publicado: oct 5, 2015
    As the module is designed to support both Launchpadв„ў and SmartRFв„ў Studio platforms, configure the board by changing the on-board jumper positions according to your application. The default configuration of the jumpers on the BoosterPackв„ў module is set for LaunchPad applications. The interface details of CC112x-CC1190 BoosterPack with LaunchPad and SmartRF Studio applications are
  • AN110 – Using CC1190 Front End with CC112x/CC120x under FCC 15.247 (Rev. B)
    PDF, 555 Kb, Revisión: B, Archivo publicado: jun 13, 2013
  • TI LPRF EASYMODE
    PDF, 57 Kb, Archivo publicado: dic 12, 2014
    This application report describes the frame format and physical layer (PHY) parameters for TI LPRF EasyMode (EasyMode50K), which provides unified, simple, and well defined PHY modes supported by all sub-1 GHz radio devices from LPRF.
  • DN038 -- Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz
    PDF, 905 Kb, Archivo publicado: nov 27, 2012
    CC1120, CC1121, CC1125, CC1175, CC1200, CC1201, CC1111, CC1101, CC1110, CC110L Miniature Helical PCB Antenna for 868 MHz or 915/920 MHz CC113L, CC115L
  • CC112x-CC1190 Boost Software Examples
    PDF, 55 Kb, Archivo publicado: oct 19, 2015
  • Antenna Diversity
    PDF, 556 Kb, Archivo publicado: oct 23, 2014
    This application report provides real-world measurement results showing the benefit of antenna diversity. The CC1200 radio transceiver is used as an example in this design note, but the results are applicable for all TI LPRF radios.
  • Achieving Optimum Radio Range (Rev. A)
    PDF, 8.7 Mb, Revisión: A, Archivo publicado: sept 5, 2017
    This application report addresses the parameters that affect the radio range. For identical radio settings, the range is highly dependent on the surroundings and environment. The link budget and the positioning of the antennas and their distance to the ground surface are major contributors to long range. A general specific range can never be specified or guaranteed for any type of radio communicat
  • CC-Antenna-DK2 and Antenna Measurements Summary
    PDF, 14.8 Mb, Archivo publicado: marzo 3, 2016
    The purpose of the antenna development kit (CC-Antenna-DK2) is to ease the decision of which type of low-cost antenna can be implemented as well as give an estimation of the performance that can be achieved.
  • DN035 -- Antenna Quick Guide (Rev. A)
    PDF, 138 Kb, Revisión: A, Archivo publicado: feb 12, 2013

Linea modelo

Serie: CC1121 (4)

Clasificación del fabricante

  • Semiconductors > Wireless Connectivity > Companion Wireless Solutions > Smart RF Transceivers