Datasheet Texas Instruments CDCLVD2104RHDR — Ficha de datos

CDCLVD2104
www.ti.com SCAS903A – JUNE 2010 – REVISED AUGUST 2010 Dual 1:4 Low Additive Jitter LVDS Buffer
Check for Samples: CDCLVD2104 FEATURES 1 Dual 1:4 Differential Buffer
Low Additive Jitter 3000 V Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions” is not implied. Exposure to absolute–maximum–rated conditions for extended periods may affect device reliability.
The outputs can handle permanent short. RECOMMENDED OPERATING CONDITIONS
VCC Device supply voltage TA Ambient temperature MIN TYP MAX 2.375 2.5 2.625 V 85 В°C -40 UNITS Submit Documentation Feedback Copyright В© 2010, Texas Instruments Incorporated Product Folder Link(s): CDCLVD2104 3 CDCLVD2104
SCAS903A – JUNE 2010 – REVISED AUGUST 2010 www.ti.com THERMAL INFORMATION
CDCLVD2104
THERMAL METRIC (1) QFN UNITS 28 PINS
qJA Junction-to-ambient thermal resistance 34 qJC(top) Junction-to-case(top) thermal resistance 27 qJB Junction-to-board thermal resistance yJT Junction-to-top characterization parameter yJB Junction-to-board characterization parameter 8 qJC(bottom) Junction-to-case(bottom) thermal resistance 4 (1) 9 В°C/W 0.4 For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953. ELECTRICAL CHARACTERISTICS
At VCC = 2.375 V to 2.625 V and TA = –40°C to 85°C (unless otherwise noted).
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT EN CONTROL INPUT CHARACTERISTICS
VdI3 3-State VdIH Input high voltage Open VdIL Input low voltage IdIH Input high current VCC = 2.625 V, VIH = 2.625 V IdIL Input low current VCC = 2.625 V, VIL = 0 V Rpull(EN) Input pull-up/ pull-down resistor 0.5Г—VCC V 0.7Г—VCC V
0.2×VCC V 30 mA –30 mA 200 kΩ 2.5V LVCMOS (see Figure 7) INPUT CHARACTERISTICS
fIN Input frequency Vth Input threshold voltage VIH Input high voltage VIL Input low voltage IIH Input high current VCC = 2.625 V, VIH = 2.625 V IIL Input low current VCC = 2.625 V, VIL = 0 V ΔV/ΔT Input edge rate 20% – 80% CIN Input capacitance External threshold voltage applied
to complementary input 200 MHz 1.5 V Vth + 0.1 VCC V 0 Vth – 0.1 V 10 mA 1.1 –10
1.5 mA
V/ns 2.5 pF DIFFERENTIAL INPUT CHARACTERISTICS
fIN Input frequency Clock input VIN, Differential input voltage
peak-to-peak VICM = 1.25 V VICM Input common-mode voltage range VIN, DIFF, PP > 0.4V IIH Input high current VCC = 2.625 V, VIH = 2.625 V IIL Input lo …