Datasheet Texas Instruments DAC2932 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | DAC2932 |
Convertidor digital a analógico (DAC) de doble canal, 12 bits, 40 MSPS, ultra baja potencia
Hojas de datos
Dual, 12-Bit, 40MSPS, Digital-to-Analog Converter datasheet
PDF, 1.1 Mb, Revisión: D, Archivo publicado: jul 11, 2005
Extracto del documento
Precios
Estado
| DAC2932PFBR | DAC2932PFBT | |
|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí | No |
Embalaje
| DAC2932PFBR | DAC2932PFBT | |
|---|---|---|
| N | 1 | 2 |
| Pin | 48 | 48 |
| Package Type | PFB | PFB |
| Industry STD Term | TQFP | TQFP |
| JEDEC Code | S-PQFP-G | S-PQFP-G |
| Package QTY | 2000 | 250 |
| Carrier | LARGE T&R | SMALL T&R |
| Device Marking | DAC2932PFB | DAC2932PFB |
| Width (mm) | 7 | 7 |
| Length (mm) | 7 | 7 |
| Thickness (mm) | 1 | 1 |
| Pitch (mm) | .5 | .5 |
| Max Height (mm) | 1.2 | 1.2 |
| Mechanical Data | Descargar | Descargar |
Paramétricos
| Parameters / Models | DAC2932PFBR | DAC2932PFBT |
|---|---|---|
| Architecture | Current Source | Current Source |
| DAC Channels | 2 | 2 |
| Interface | Parallel CMOS | Parallel CMOS |
| Interpolation | 1x | 1x |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 |
| Package Group | TQFP | TQFP |
| Package Size: mm2:W x L, PKG | 48TQFP: 81 mm2: 9 x 9(TQFP) | 48TQFP: 81 mm2: 9 x 9(TQFP) |
| Power Consumption(Typ), mW | 29 | 29 |
| Rating | Catalog | Catalog |
| Resolution, Bits | 12 | 12 |
| SFDR, dB | 75 | 75 |
| Sample / Update Rate, MSPS | 40 | 40 |
Plan ecológico
| DAC2932PFBR | DAC2932PFBT | |
|---|---|---|
| RoHS | Obediente | Obediente |
Notas de aplicación
- Design for a Wideband Differential Transimpedance DAC Output (Rev. A)PDF, 438 Kb, Revisión: A, Archivo publicado: oct 17, 2016
High-speed digital-to-analog converters commonly offer a complementary current output signal. Most output interface implementations use either a resistive load and/or a transformer to convert this current source signal to a voltage. Where a dc-coupled interface is required, a carefully designed differential transimpedance stage can offer an attractive alternative. Design considerations and options - Wideband Complementary Current Output DAC Single-Ended InterfacePDF, 597 Kb, Archivo publicado: jun 21, 2005
High-speed digital-to-analog converters (DACs) most often use a transformer-coupled output stage. In applications where this configuration is not practical, a single op ampdifferential to single-ended stage has often been used. This application note steps through the exact design equations required to achieve gain matching from each output as well as a matched input impedance to each of the DA
Linea modelo
Serie: DAC2932 (2)
Clasificación del fabricante
- Semiconductors> Data Converters> Digital-to-Analog Converters (DACs)> High Speed DACs (>10MSPS)