Datasheet Texas Instruments DCR010503 — Ficha de datos
Fabricante | Texas Instruments |
Serie | DCR010503 |
Miniatura, convertidores CC / CC regulados aislados de 1 W
Hojas de datos
DCR01 Series, 1-W, 1000-Vrms Isolated, Regulated DC–DC Converter Modules datasheet
PDF, 769 Kb, Revisión: D, Archivo publicado: jun 30, 2016
Extracto del documento
Precios
Estado
DCR010503P | DCR010503U | DCR010503U/1K | DCR010503UE4 | |
---|---|---|---|---|
Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
Disponibilidad de muestra del fabricante | Sí | Sí | Sí | No |
Embalaje
DCR010503P | DCR010503U | DCR010503U/1K | DCR010503UE4 | |
---|---|---|---|---|
N | 1 | 2 | 3 | 4 |
Pin | 10 | 12 | 12 | 12 |
Package Type | NVE | DVB | DVB | DVB |
Industry STD Term | PDIP | SOP | SOP | SOP |
JEDEC Code | R-PDIP-T | R-PDSO-G | R-PDSO-G | R-PDSO-G |
Package QTY | 20 | 28 | 1000 | 28 |
Carrier | TUBE | TUBE | LARGE T&R | TUBE |
Device Marking | DCR010503P | DCR010503U | DCR010503U | DCR010503U |
Width (mm) | 6.61 | 7.5 | 7.5 | 7.5 |
Length (mm) | 22.86 | 17.9 | 17.9 | 17.9 |
Thickness (mm) | 3.94 | 2.3 | 2.3 | 2.3 |
Pitch (mm) | 2.54 | 1.27 | 1.27 | 1.27 |
Max Height (mm) | 4.95 | 2.65 | 2.65 | 2.65 |
Mechanical Data | Descargar | Descargar | Descargar | Descargar |
Paramétricos
Parameters / Models | DCR010503P | DCR010503U | DCR010503U/1K | DCR010503UE4 |
---|---|---|---|---|
Iout(Max), A | 0.3 | 0.3 | 0.3 | 0.3 |
Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 | -40 to 85 |
Package Size: mm2:W x L, PKG | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) | See datasheet (PDIP),12SOP: 185 mm2: 10.33 x 17.9(SOP) |
Package Type | Leaded | Leaded | Leaded | Leaded |
Preset Vout, V | 3.3 | 3.3 | 3.3 | 3.3 |
Regulated Outputs | 1 | 1 | 1 | 1 |
Special Features | Regulated,Single Output,1W | Regulated,Single Output,1W | Regulated,Single Output,1W | Regulated,Single Output,1W |
Vin(Max), V | 5.5 | 5.5 | 5.5 | 5.5 |
Vin(Min), V | 4.5 | 4.5 | 4.5 | 4.5 |
Vout(Max), V | 3.366 | 3.366 | 3.366 | 3.366 |
Vout(Min), V | 3.234 | 3.234 | 3.234 | 3.234 |
Plan ecológico
DCR010503P | DCR010503U | DCR010503U/1K | DCR010503UE4 | |
---|---|---|---|---|
RoHS | Obediente | Obediente | Obediente | Obediente |
Pb gratis | Sí | Sí | Sí | Sí |
Notas de aplicación
- DC-to-DC Converter Noise ReductionPDF, 40 Kb, Archivo publicado: oct 2, 2000
The inherent switching inside the DC-to-DC converter gives rise to potential sources of noise. This noise manifests itself on the output voltage as spikes at the switching frequency. Due to size and cost requirements, internal filtering is limited but usually adequate for most applications. When excessive noise is suspected, you must rule out extraneous noise sources. - Ext. Synch. of the DCP01/02, DCR01/02, and DCV01 Series of DC/DC Converters (Rev. B)PDF, 120 Kb, Revisión: B, Archivo publicado: jul 20, 2009
- AB-177: Optimizing Performance of the DCP01B, DCV01, and DCP02 Series (Rev. A)PDF, 122 Kb, Revisión: A, Archivo publicado: oct 23, 2001
The DCP01B, DCV01, and DCP02 are three families of miniature DC/DC converters providing an isolated unregulated voltage output. All are fabricated using a CMOS/DMOS process with the DCP01B replacing the familiar DCP01 family that was fabricated from a bipolar process. The DCP02 is essentially an extension of the DCP01B family providing a higher power output with a significantly improved load regul
Linea modelo
Serie: DCR010503 (4)
Clasificación del fabricante
- Semiconductors> Power Management> Power Modules> Isolated Module> 1W & 2W Miniature Module