Datasheet Texas Instruments DP83848H — Ficha de datos

FabricanteTexas Instruments
SerieDP83848H
Datasheet Texas Instruments DP83848H

Mini - Transceptor sencillo de temperatura extrema 10/100

Hojas de datos

DP83848x PHYTER Mini / LS Single Port 10/100 MB/s Ethernet Transceiver datasheet
PDF, 2.3 Mb, Revisión: E, Archivo publicado: sept 8, 2014
Extracto del documento

Precios

Estado

DP83848HSQ/NOPB
Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricante

Embalaje

DP83848HSQ/NOPB
N1
Pin40
Package TypeRTA
Industry STD TermWQFN
JEDEC CodeS-PQFP-N
Package QTY250
CarrierSMALL T&R
Device Marking83848HSQ
Width (mm)6
Length (mm)6
Thickness (mm).75
Pitch (mm).5
Max Height (mm).8
Mechanical DataDescargar

Paramétricos

Parameters / ModelsDP83848HSQ/NOPB
DP83848HSQ/NOPB
Cable Length, m137
Datarate, Mbps10/100
FunctionPHY
InterfaceMII,RMII
JTAG1149.1No
Operating Temperature Range, C-40 to 125
Package GroupWQFN
Package Size: mm2:W x L, PKG40WQFN: 36 mm2: 6 x 6(WQFN)
Port CountSingle
RatingCatalog
Supply Voltage, Volt3.3

Plan ecológico

DP83848HSQ/NOPB
RoHSObediente

Notas de aplicación

  • DP83848 Sin 10/100Mb/s Ethernet Transcvr Reduced Media Indep Interfce RMII Mode (Rev. A)
    PDF, 168 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report summarizes how a designer can take advantage of RMII mode of the DP83848 toprovide lower cost system design.
  • DP83848 - Single 10/100 Mb/s Ethernet Transceiver Ini During Pwr Dwn Mode (Rev. A)
    PDF, 41 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report details the procedure to put the device into Power Down mode during initialization,configure the registers of the device to the desired mode, and then exit Power Down.
  • AN-1469 PHYTERВ® Design & Layout Guide (Rev. D)
    PDF, 289 Kb, Revisión: D, Archivo publicado: abr 26, 2013
    This application report describes PHYTERв„ў design and layout guidelines.
  • DP83848M/T/H PHYTERВ® Small Form Factor 10/100 Single Port Physical Layer Product
    PDF, 1.7 Mb, Archivo publicado: mayo 15, 2012
  • DP83848 - Single 10/100 Mb/s Ethernet Transceiver Energy Detect Mode (Rev. A)
    PDF, 38 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report explains the concept and the operation of the Energy Detect mode of the DP83848.
  • AN-1499 DP83846 to DP83848C/I/YB PHYTER System Rollover Document (Rev. B)
    PDF, 178 Kb, Revisión: B, Archivo publicado: abr 26, 2013
    This is an informational document detailing points to be considered when updating an existing 10/100Mb/s Ethernet design, using Texas Instruments DP83846 Ethernet Physical Layer (PHY) product, to thenew DP83848C/I/YB PHYTER product. Although the basic functions of the device are similar, differencesinclude feature set, pin functions, package and pinout, and possibly register operation. The i
  • AN-1511 Cable Discharge Event (Rev. A)
    PDF, 262 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report discusses exposing semiconductor devices to potentially destructive Electro StaticDischarge (ESD).
  • Reducing Radiated Emissions in Ethernet 10/100 LAN Applications (Rev. A)
    PDF, 70 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report explains how Texas Instruments' PHYTER products help system designers toreduce radiated emissions in Ethernet 10/100 LAN applications.
  • AN-1519 DP83848 PHYTERВ® Transformerless Ethernet Operation (Rev. A)
    PDF, 249 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report describes a method for using Texas Instruments PHYTERв„ў products withouttransformer magnetics. This includes a list of recommendations for configuring transformerless systems. Adescription of a typical network configuration is provided, followed by descriptions of non-typicaltransformerless configurations. Finally, this application note presents PHYTER product pe
  • AN-1540 Power Measurement of Ethernet Physical Layer Products (Rev. B)
    PDF, 79 Kb, Revisión: B, Archivo publicado: abr 26, 2013
    System designers require accurate component power consumption specifications, for the purposes of thermal management, component selection, and power distribution planning.
  • AN-1507 DP83848 and DP83849 100Mb Data Latency (Rev. B)
    PDF, 301 Kb, Revisión: B, Archivo publicado: abr 26, 2013
    The purpose of this document is to define the 100Mb Transmit and Receive latencies of the TexasInstruments Semiconductor DP83848 and DP83849 Ethernet Transceiver family, and to document theircontributions for end-to-end packet transfer in both MII and RMII modes of operation.
  • Diff Between NSC 10/100 Mb/s Ethernet Physical Layer Devices (Rev. A)
    PDF, 116 Kb, Revisión: A, Archivo publicado: abr 26, 2013
    This application report discusses the differences between the 10/100 Mb/s Ethernet Physical Layerdevices, DP8384x.
  • AN-1548 PHYTER 100 Base-TX Reference Clock Jitter Tolerance (Rev. B)
    PDF, 126 Kb, Revisión: B, Archivo publicado: abr 26, 2013
    The use of a reference clock that is less stable than those directly driven from an oscillator may be required for some applications. In addition, some customer applications may require partnering with devices that operate outside of the IEEE 802.3 standard for transmitted jitter.

Linea modelo

Serie: DP83848H (1)

Clasificación del fabricante

  • Semiconductors> Interface> Ethernet