Datasheet Texas Instruments INA146 — Ficha de datos
| Fabricante | Texas Instruments |
| Serie | INA146 |
Amplificador de diferencia de ganancia programable de alto voltaje
Hojas de datos
High-Voltage, Programmable Gain Difference Amplifier datasheet
PDF, 326 Kb, Archivo publicado: sept 27, 1999
Extracto del documento
Estado
| INA146UA | INA146UA/2K5 | INA146UAE4 | |
|---|---|---|---|
| Estado del ciclo de vida | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) | Activo (Recomendado para nuevos diseños) |
| Disponibilidad de muestra del fabricante | Sí | No | No |
Embalaje
| INA146UA | INA146UA/2K5 | INA146UAE4 | |
|---|---|---|---|
| N | 1 | 2 | 3 |
| Pin | 8 | 8 | 8 |
| Package Type | D | D | D |
| Industry STD Term | SOIC | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G | R-PDSO-G |
| Package QTY | 75 | 2500 | 75 |
| Carrier | TUBE | LARGE T&R | TUBE |
| Device Marking | 146UA | INA | INA |
| Width (mm) | 3.91 | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 | 1.75 |
| Mechanical Data | Descargar | Descargar | Descargar |
Paramétricos
| Parameters / Models | INA146UA | INA146UA/2K5 | INA146UAE4 |
|---|---|---|---|
| CMRR(Min), dB | 76 | 76 | 76 |
| Common Mode Input High(Max), V | 100 | 100 | 100 |
| Common Mode Input High(Min), V | 100 | 100 | 100 |
| Common Mode Input Low(Min), V | -100 | -100 | -100 |
| Gain, V/V | 1 to 500 | 1 to 500 | 1 to 500 |
| Gain Drift(Max), ppm/C | 1 | 1 | 1 |
| Gain Error (+/-)(Max), % | 0.1 | 0.1 | 0.1 |
| Gain(Max), V/V | 100 | 100 | 100 |
| Gain(Min), V/V | 0.1 | 0.1 | 0.1 |
| Input Offset (+/-)(Max), uV | 5000 | 5000 | 5000 |
| Iq(Typ), mA | 0.6 | 0.6 | 0.6 |
| Number of Channels | 1 | 1 | 1 |
| Operating Temperature Range, C | -40 to 85 | -40 to 85 | -40 to 85 |
| Package Group | SOIC | SOIC | SOIC |
| Package Size: mm2:W x L, PKG | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) | 8SOIC: 29 mm2: 6 x 4.9(SOIC) |
| Rating | Catalog | Catalog | Catalog |
| Slew Rate(Typ), V/us | 0.45 | 0.45 | 0.45 |
| Small Signal Bandwidth(Typ), MHz | 0.5 | 0.5 | 0.5 |
| Vs(Max), V | 36 | 36 | 36 |
| Vs(Min), V | 2.76 | 2.76 | 2.76 |
Plan ecológico
| INA146UA | INA146UA/2K5 | INA146UAE4 | |
|---|---|---|---|
| RoHS | Obediente | Obediente | Obediente |
Notas de aplicación
- High-Voltage Signal Conditioning for Low Voltage ADCsPDF, 135 Kb, Archivo publicado: jun 15, 2004
Analog designers are frequently required to develop circuits that convert high-voltage signals to levels acceptable for low-voltage data converters. This paper describes several solutions for this common task using modern amplifiers and typical power supplies. Five examples of conditioning ±10V bipolar signals for low-voltage single-rail analog-to-digital converters(ADCs) are presented:
Linea modelo
Serie: INA146 (3)
Clasificación del fabricante
- Semiconductors> Amplifiers> Special Function Amplifiers> Difference Amplifiers