Datasheet Texas Instruments LDC1041NHRT — Ficha de datos

FabricanteTexas Instruments
SerieLDC1041
Numero de parteLDC1041NHRT
Datasheet Texas Instruments LDC1041NHRT

Convertidor de inductancia a digital de 8 bits Rp, 24 bits L con SPI para aplicaciones de detección inductiva 16-WSON -40 a 125

Hojas de datos

LDC1041: 8-bit Rp, 24-bit L Inductance-to-Digital Converter with SPI datasheet
PDF, 3.1 Mb, Archivo publicado: marzo 13, 2014
Extracto del documento

Precios

Estado

Estado del ciclo de vidaActivo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNo

Embalaje

Pin16
Package TypeNHR
Industry STD TermWSON
JEDEC CodeR-PDSO-N
Package QTY250
CarrierSMALL T&R
Device MarkingLDC1041
Width (mm)4
Length (mm)5
Thickness (mm).8
Pitch (mm).5
Max Height (mm).8
Mechanical DataDescargar

Plan ecológico

RoHSObediente

Kits de diseño y Módulos de evaluación

  • Evaluation Modules & Boards: LDC1041EVM
    LDC1041 Inductance-to-Digital Converter with Sample PCB Coil Evaluation Module
    Estado del ciclo de vida: Activo (Recomendado para nuevos diseños)

Notas de aplicación

  • Using Multiple Sensors With LDC1000
    PDF, 74 Kb, Archivo publicado: marzo 2, 2015
  • Configuring Inductive-to-Digital-Converters for Parallel Resistance (RP) Variati (Rev. A)
    PDF, 255 Kb, Revisión: A, Archivo publicado: jun 1, 2015
    This application note reviews sensor RP configuration for LDC devices. LDC1000, LDC1041, LDC1051, LDC1312, LDC1314, LDC1612, LDC1614 are covered in this note. Clear understanding on how to set the RP_MIN and RP_MAX registers is necessary for not only RP measurements, but also for optimum L measurements. The fundamental principle of RP measurements is that magnetic fields from an LC circuit ge
  • LDC Device Selection Guide (Rev. B)
    PDF, 360 Kb, Revisión: B, Archivo publicado: marzo 21, 2017
  • LDC Sensor Design
    PDF, 1.0 Mb, Archivo publicado: marzo 24, 2015
    Getting the best performance out of an LDC requires a sensor suitable for the measurement. This app-note covers the parameters to consider when designing a sensor for a specific application. Specific areas of focus include the physical routing characteristics of PCB based sensors, considerations for the sensor capacitor, and techniques to minimize or compensate for parasitic effects.
  • LDC1xxx LDC Target Design (Rev. A)
    PDF, 907 Kb, Revisión: A, Archivo publicado: mayo 9, 2017
    Texas Instruments’ Inductive-to-Digital Converter (LDC) technology can accurately measure with a wide variety of target sizes, shapes, and material composition. There are several target design guidelines to maximize the effectiveness of an LDC measurement system. This application note covers the relevant factors of target design that affect inductive sensing, and provides guide

Linea modelo

Serie: LDC1041 (3)

Clasificación del fabricante

  • Semiconductors > Sensing Products > Inductive Sensing > Inductance to Digital Converters