Datasheet Texas Instruments LM5575 — Ficha de datos

FabricanteTexas Instruments
SerieLM5575
Datasheet Texas Instruments LM5575

SWITCHER® SIMPLE 6V a 75V, regulador reductor de vinilo ancho 1.5A

Hojas de datos

LM5575/LM5575Q SIMPLE SWITCHER® 75V, 1.5A Step-Down Switching Regulator datasheet
PDF, 1.1 Mb, Revisión: G, Archivo publicado: abr 4, 2013
Extracto del documento

Precios

Estado

LM5575MHLM5575MH/NOPBLM5575MHXLM5575MHX/NOPB
Estado del ciclo de vidaNRND (No recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)NRND (No recomendado para nuevos diseños)Activo (Recomendado para nuevos diseños)
Disponibilidad de muestra del fabricanteNoNo

Embalaje

LM5575MHLM5575MH/NOPBLM5575MHXLM5575MHX/NOPB
N1234
Pin16161616
Package TypePWPPWPPWPPWP
Industry STD TermHTSSOPHTSSOPHTSSOPHTSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY92922500
CarrierTUBETUBELARGE T&R
Device MarkingMHLM5575MHMH
Width (mm)4.44.44.44.4
Length (mm)5555
Thickness (mm)1111
Pitch (mm).65.65.65.65
Max Height (mm)1.21.21.21.2
Mechanical DataDescargarDescargarDescargarDescargar

Paramétricos

Parameters / ModelsLM5575MH
LM5575MH
LM5575MH/NOPB
LM5575MH/NOPB
LM5575MHX
LM5575MHX
LM5575MHX/NOPB
LM5575MHX/NOPB
Approx. Price (US$)2.05 | 1ku
Control ModeCurrent ModeCurrent ModeCurrent ModeCurrent Mode
Duty Cycle(Max), %959595
Duty Cycle(Max)(%)95
Iout(Max), A1.51.51.5
Iout(Max)(A)1.5
Iq(Typ), mA111
Iq(Typ)(mA)1
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125
Operating Temperature Range(C)-40 to 125
Package GroupHTSSOPHTSSOPHTSSOPHTSSOP
RatingCatalogCatalogCatalogCatalog
Regulated Outputs111
Regulated Outputs(#)1
Special FeaturesEnable,TrackingEnable,TrackingEnable
Tracking
Enable,Tracking
Switching Frequency(Max), kHz500500500
Switching Frequency(Max)(kHz)500
Switching Frequency(Min), kHz505050
Switching Frequency(Min)(kHz)50
TypeConverterConverterConverterConverter
Vin(Max), V757575
Vin(Max)(V)75
Vin(Min), V666
Vin(Min)(V)6
Vout(Max), V707070
Vout(Max)(V)70
Vout(Min), V1.231.231.23
Vout(Min)(V)1.23

Plan ecológico

LM5575MHLM5575MH/NOPBLM5575MHXLM5575MHX/NOPB
RoHSSee ti.comObedienteDesobedienteObediente
Pb gratisNo

Notas de aplicación

  • Understanding and Applying Current-Mode Control Theory
    PDF, 409 Kb, Archivo publicado: agosto 19, 2007
  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, Revisión: B, Archivo publicado: mayo 3, 2004
    Application Note 643 EMI/RFI Board Design
  • Input and Output Capacitor Selection
    PDF, 219 Kb, Archivo publicado: sept 19, 2005
  • AN-1197 Selecting Inductors for Buck Converters (Rev. B)
    PDF, 558 Kb, Revisión: B, Archivo publicado: abr 23, 2013
    This application report provides design information to help select an off-the-shelf inductor for anycontinuous-mode buck converter application.
  • AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
    PDF, 3.6 Mb, Revisión: A, Archivo publicado: abr 23, 2013
    This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
  • AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A)
    PDF, 1.4 Mb, Revisión: A, Archivo publicado: abr 23, 2013
    This application note provides thermal power analysis techniques for analyzing the power IC.
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, Revisión: A, Archivo publicado: abr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • Semiconductor and IC Package Thermal Metrics (Rev. C)
    PDF, 201 Kb, Revisión: C, Archivo publicado: abr 19, 2016
  • AN-1997 Error Amplifier Limitations in High-Performance Regulator Applications (Rev. A)
    PDF, 153 Kb, Revisión: A, Archivo publicado: mayo 6, 2013
    The development of realistic predictions to assist the power supply engineer during the control loop design process is facilitated in this application report by appropriate small-signal and bode plot analysis, the validity of which is verified through simulation results.
  • Quick Start Guide for a 1.5 Amp Buck Regulator Using the LM5575 and LM25575 (Rev. B)
    PDF, 63 Kb, Revisión: B, Archivo publicado: abr 23, 2013
    This application note provides an easy to use process to help users design a 1.5 Amp buck regular usingthe LM5575 and LM25575 switching regulators.
  • Low EMI Layout Made SIMPLE With LM43600/1/2/3 and LM46000/1/2 (Rev. A)
    PDF, 512 Kb, Revisión: A, Archivo publicado: sept 12, 2014
    Printed Circuit Board (PCB) layout for Switched Mode Power Supplies (SMPS) is critical to achieve proper converter operation good thermal performance and excellent radiated EMI performance. Optimized board layout for low radiated EMI is made very simple by the package and pin arrangement of the SIMPLE SWITCHER Synchronous Buck Converter family LM4360x and LM4600x
  • AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
    PDF, 82 Kb, Revisión: C, Archivo publicado: abr 23, 2013
    When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
  • AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
    PDF, 374 Kb, Revisión: C, Archivo publicado: abr 23, 2013
    This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
  • AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
    PDF, 2.5 Mb, Revisión: C, Archivo publicado: abr 24, 2013
    Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
  • AN-1246 Stresses in Wide Input DC-DC Converters (Rev. C)
    PDF, 427 Kb, Revisión: C, Archivo publicado: abr 23, 2013
    This application note discusses stresses in wide input DC-DC converters.
  • AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
    PDF, 9.2 Mb, Revisión: B, Archivo publicado: abr 23, 2013
    This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP

Linea modelo

Clasificación del fabricante

  • Semiconductors> Power Management> Non-isolated DC/DC Switching Regulator> Step-Down (Buck)> Buck Converter (Integrated Switch)